Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in San Antonio?
Gate access control installation in San Antonio typically costs between $1,850 and $6,400 for a complete residential system, with most homeowners in areas like Alamo Heights, Stone Oak, and Helotes paying around $3,200 for a solid mid-range keypad or intercom setup with two remotes. Entry-level keypad systems start around $850 installed, while full telephone-entry or cellular-based systems for larger properties can reach $9,500 or more. The exact number depends on whether you’re adding access control to an existing gate or pairing it with a new gate installation, and what kind of power and connectivity already runs to your gate posts.
We’re Latch & Post Gate Repair San Antonio, and we’ve been told more than once that our written price before work starts is the reason a homeowner chose us over the other two bids sitting on their kitchen counter. That’s the Cedarwell way of doing things: you know the number, in writing, before we touch anything.
Gate Access Control Cost Breakdown (2026)
Here’s what we’re seeing across San Antonio in 2026. These are real ranges from our service area, which stretches from Boerne down through Castle Hills and out toward Cibolo. You won’t find these exact line items on a national contractor site; this is what the local market actually bears.
| Component or Service | Typical Installed Cost in San Antonio |
|---|---|
| Basic digital keypad (standalone, battery or solar) | $420 – $950 |
| Keypad with two remotes and receiver upgrade | $850 – $1,650 |
| Intercom system (audio only, single entrance) | $1,400 – $2,800 |
| Video intercom with mobile app | $2,200 – $4,500 |
| Telephone entry system (calls your cell) | $2,800 – $5,600 |
| Cellular gate opener with app control | $1,200 – $2,600 |
| Vehicle loop detector (auto-exit sensor) | $550 – $1,100 |
| Complete access control package on existing gate | $1,850 – $4,200 |
| Access control paired with new gate install | $3,800 – $9,500 |
| Service call for diagnosis (credited toward repair) | $89 – $149 |
What pushes a job toward the higher end? Distance from the house to the gate matters more than most people expect. In places like Timberwood Park or the Hill Country ranches west of Bandera Road, a gate can sit 400 feet from the electrical panel. That means trenching for low-voltage wire, upgraded transformers, or a solar panel and cellular module when trenching isn’t practical. A gate 20 feet from the garage is a different job entirely.
Brand also moves the needle. We’re factory-trained on the systems San Antonio families actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. A Ghost Controls solar keypad kit runs less installed than a full Viking telephone entry system, and the price difference is real. We won’t tell you to spend more than the gate needs, but we will tell you honestly what your existing opener supports before we recommend anything.
What Affects Gate Access Control Pricing in San Antonio
- Power source at the gate. If you already have 110-volt power at the gate post, your access control cost drops sharply. If you don’t, San Antonio’s limestone shelf rock can make trenching slow going, and solar or battery systems become part of the quote. We’ll walk the line with you and show you the written number for each option.
- Distance from the house to the gate. Every extra 50 feet of trench or conduit adds cost. Hill Country lots especially, where the gate sits at the bottom of a slope and the house is up top, run wires longer than flat neighborhoods like Terrell Heights.
- Existing opener brand and age. An older Mighty Mule control board may not accept a newer LiftMaster keypad without a receiver swap. We’ll tell you that on the first visit, not after the parts are on the truck.
- Number of users and access points. Two remotes versus a dozen, a single front gate versus a front gate plus a rear alley gate in Monte Vista. Each access point needs its own communication path, and each one adds a line to the written price.
- Connectivity preference. A keypad with no internet is the budget path. A cellular-connected system that lets you open the gate from your phone while you’re at work in the Medical Center costs more up front, and some include a small monthly carrier fee. We’ll break that out separately so you know what’s one-time and what’s recurring.
- Gate type and condition. A lightweight aluminum drive gate in Cibolo is a straightforward mount. A heavy iron swing gate in Olmos Park that hasn’t been balanced in a decade may need hinge and post work before the access control mounts level. We’ll tell you if the gate itself needs attention before we bolt on new electronics, because mounting a $1,800 keypad on a gate that binds against the post is a waste of your money.
How to Save on Gate Access Control
Saving money on gate access control usually comes down to timing and honesty about what you actually need. We say this because we’ve seen people buy systems with features they never open the app to use.
- Say no to features you won’t use. Mobile app access is great, but if everyone in the house drives up and punches a code, a reliable keypad with two remotes is often $1,000 less than a full app-connected system. Tell us how your family actually comes and goes, and we’ll quote what fits that pattern.
- Bundle the access control with any needed gate repair. If the gate’s already binding or the opener gear is stripped, we can quote both at once. It’s cheaper to have us out once with the right parts than twice with two service fees. Latch and post work together; that’s the whole gate, and that’s what we focus on.
- Choose remotes over apps where possible. A simple receiver upgrade with two LiftMaster remotes often runs under $500 installed, while a cellular bridge with app control can run four times that. Both open the gate. One costs less.
- Use the free estimate. Every Latch & Post visit includes a written price before any work starts. Call (325) 252-5195 and we’ll come walk your gate line, tell you what your existing opener supports, and hand you a number you can take a week to think about. No pressure, no follow-up calls pushing you.
- Plan for the limestone. If you’re building new or replacing a gate anyway, run conduit while the ground’s already open. It’s the cheapest access control insurance in San Antonio.
Can You Add Access Control to an Existing Gate?
Yes you can, and in our experience, roughly 7 out of every 10 access control jobs in San Antonio are retrofits to existing gates rather than new installs. That ratio holds across the neighborhoods we serve, from older gates in Jefferson and Monticello Park to newer builds in Alamo Ranch. The gate itself rarely has to come down; most keypads, intercoms, and receivers mount directly to the existing post or fence line.
What matters more is the condition of the gate and the old opener. We always check the hinge tension and post stability before we mount anything, because a gate that leans or drags against the ground will eventually strip a new opener gear and tear up the access control wiring. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why we look at the whole gate, not just the new keypad.
Our technicians are factory-trained on the access control and opener brands most common in San Antonio homes: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate has something else on it, we’ll tell you straight whether we can service it or whether you’ll need to replace the receiver and remotes to get the access control you want.
How Does Gate Access Control Work?
When you punch a code into the keypad or press a remote button, the access control unit sends a signal to the gate opener’s receiver. The receiver prompts the opener to swing or slide the gate open, hold it for a set time, then close it. Vehicle loop detectors buried in the driveway can trigger the gate to auto-open when a car pulls up, which is why so many San Antonio homes with long driveways pair an access keypad with a loop sensor.
For phone-entry or app-based systems, the control unit may use a cellular module to send a notification or call to your phone. When you answer, you press a key to open the gate remotely. These systems need a stable signal, which most of San Antonio has, though some Hill Country lots north of Camp Bullis can see spotty coverage depending on carrier. We test signal strength during the estimate, before we quote the system.
Every system we install gets the same treatment on site: written price first, drop cloths and shoe covers if we step inside your home to run wire or program the indoor keypad, and a photo of the clean-up before the technician leaves. We know there’s probably a dog barking at the door and a kid napping upstairs, and we work like we’d want someone working in our own house.
Why Gate Access Control Costs More at Some San Antonio Homes
A gate access control system on a 1970s-era home in Northwood with a short driveway and existing power is a two-hour job. The same brand of keypad on a two-acre property in Fair Oaks Ranch with no power at the gate, no conduit, and a gate that needs hinge work is a full day and change. Both are real jobs we’ve done, and the written prices reflect the difference honestly.
Limestone is the wildcard in this part of Texas. San Antonio sits on the Edwards Plateau, and shallow rock can turn a 30-minute trench into three hours with a rock saw. That shows up in the quote, not as a surprise later. Our estimator walks the line before quoting, and the number we hand you covers the trenching, the conduit, the backfill, and the wire.
We also see some older neighborhoods, like parts of Terrell Hills and Alamo Heights, where the gate itself is original to a 1960s or 1970s home. Iron gates that have sagged for 40 years need hinge and post attention before access control mounts level. We’d rather quote that honestly and do both in one trip than leave you with a gate that opens fine today and binds after the next big rain.
FAQs – Gate Access Control Cost
How much does a gate keypad cost in San Antonio?
A basic gate keypad in San Antonio typically runs $420 to $950 installed, while a keypad with upgraded remotes and receiver runs $850 to $1,650. The brand, wiring, and whether we’re adding it to an existing LiftMaster, Ghost Controls, or Mighty Mule opener all affect the final number. Call (325) 252-5195 for a written quote on your exact gate setup.
Is it cheaper to repair or replace a gate opener?
Repairing a gate opener usually costs $180 to $450, while replacing it with a comparable new unit runs $800 to $1,800 installed. If the opener is more than 15 years old or the control board has failed on a brand with limited parts availability, replacement starts to make more sense. We’ll give you both numbers in writing and you decide.
How much does it cost to add a phone or intercom entry system to a gate in San Antonio?
Audio intercom systems run $1,400 to $2,800 installed, and video intercom systems with mobile app connectivity run $2,200 to $4,500. Telephone entry systems that call your cell phone when a visitor arrives typically start around $2,800. These prices assume power or a solar option at the gate; long wire runs add to the total.
Can you come out today for a gate access control repair?
A live person answers our calls 24 hours a day, 7 days a week, including nights and weekends. If the job is in our San Antonio service area and the parts are available locally, we can often schedule same-day. Call (325) 252-5195 and you’ll speak to a person, not a voicemail queue.
How long does gate access control installation take?
A basic keypad or remote receiver installation takes 1 to 3 hours. A complete intercom system with new wiring and trenching can take a full day. We’ll give you a written time estimate along with the written price before any work starts, so you’re not guessing when we’ll be done.
Do I need Wi-Fi for gate access control?
No. Many San Antonio homes use keypads and remotes that require no internet at all. Phone-entry and app-based systems use cellular signals, not your home Wi-Fi, which matters for gates far from the router. We’ll show you which options work at your specific gate during the free estimate.
Why San Antonio Homeowners Choose Latch & Post for Gate Access Control
We’re a Cedarwell-family gate specialist, not a general handyman. Gate repair, gate installation, and electric gate repair are what we do, every day. We know that the latch and the post are the two points where every gate either works or doesn’t, and access control lives at that intersection: the keypad on the post, the receiver wired to the opener, the remote in your hand.
Here’s what every job with us includes, whether it’s a $400 keypad or a $6,000 intercom system. Before any work starts, you get a written price. You never say yes under pressure. When our technician arrives, they’re background-checked and uniformed, and they follow the Cedarwell C.A.R.E. values: clean up like it’s our own home, ask before we move or touch anything, respect your family’s time and quiet hours, and explain the price before the work. If we need to step inside your home to program a keypad or run wire, we put on shoe covers and lay drop cloths first, and we take a photo of the clean-up before we leave. Your floors stay clean, period.
And every repair or installation is covered by the 365-Day Done Right Promise. If it’s not right, Latch & Post makes it right. No argument, no fine print.
Our technicians are factory-trained on the gate access control systems San Antonio families actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range covers most residential gates in Bexar County and the surrounding Hill Country, and it means the right fix usually happens on the first visit.
Get a Written Price for Your San Antonio Gate Access Control
You don’t have to guess what your gate access control will cost. We’ll come to your home anywhere in San Antonio, walk the gate line with you, check the existing opener and power, and hand you a written price before any work begins. Then you decide, on your own timeline.
Call (325) 252-5195 and a live person answers. Not a voicemail, not a callback later. We’ll set up a time that works for you, including weekends, and our technician will knock before touching anything.
Read more about our home services or dive into the full picture on our Gate Access Control in San Antonio page for installation details and brand coverage across the metro.
Pricing reflects the San Antonio market as of 2026. Latch and Post Gate Repair San Antonio offers free estimates – call (325) 252-5195.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Antonio, serving San Antonio since 2009.
What Our Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick