Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Electric Gate Repair in San Antonio: What to Know First
Ghost Controls electric gate repair in San Antonio typically runs between $185 and $520 depending on the failed component, with most jobs diagnosed and completed in a single visit. We’re an independent Ghost Controls service provider, not a manufacturer affiliate, and we give you a written price before any work begins. If your Ghost Controls gate opener is dead, stuck mid-cycle, or ignoring the remote, this page explains exactly what’s going wrong and what it costs to fix. Call (325) 252-5195 any time, day or night, and a live person picks up.
This page is written for San Antonio homeowners who own a Ghost Controls opener, probably on a driveway swing gate, and want the straight answer on repair. You’ll find the failure modes we see most in this part of Texas, what a real Ghost Controls repair visit looks like, and honest price ranges for the parts and labor involved.
How Ghost Controls Products Fail, and How We Fix Them
Ghost Controls builds solid residential swing gate openers, but San Antonio’s heat, humidity, and occasional limestone dust take a toll. Here are the five failure patterns we see most often on Ghost Controls jobs across the metro:
- Arm actuator motor burnout on the AXDP and REX series. The linear arm actuator works hard in summer. When the gate is slightly out of plumb or the hinges drag, the motor pulls extra amperage every cycle and eventually burns out. We check gate movement first, fix the mechanical drag, then replace the actuator arm, because a new arm on a binding gate fails again within a year.
- Control board failure after lightning or power surges. Ghost Controls boards are more exposed to San Antonio thunderstorms than most people realize. The control board will show a stuck LED or no response at all. We replace with a Ghost Controls board when available and add a surge protector recommendation so the new one isn’t the next casualty. A dead board is the most common repair we do on the AXD series.
- Remote control and keypad desync after a battery change or power outage. Ghost Controls openers lose their rolling-code memory more often than other brands when the power blinks. The opener is fine, but every remote and the keypad stop talking to it. We reprogram all devices on site, and we always test from the street and from inside the gate before we leave.
- Safety sensor misalignment and false obstruction faults. Ghost Controls photo eye sensors sit low, and San Antonio yards settle. When a sensor shifts a few degrees, the gate thinks something is in the way and reverses mid-cycle or refuses to close. We realign, tighten the mounts, and verify the beam through its full range. We also check that the sensor wiring hasn’t been chewed by squirrels, which happens more than anyone wants to admit.
- Battery backup failure on the BUB and solar-equipped models. Ghost Controls makes battery backup kits popular on San Antonio ranches and larger lots. The battery inside the opener box has a working life of three to five years, and when it goes, the gate works on outlet power but dies the moment the power drops. We test the battery under load, not just with a voltmeter, because a battery that reads 13 volts resting can still collapse under start-up demand.
Styles & brands we work with
Our Ghost Controls Electric Gate Repair Process
Every Ghost Controls repair we do in San Antonio follows the same quiet routine. Cody Beckman and our technicians carry this same notepad-and-pencil discipline on every call.
- 1
We start with the gate itself, not the opener. We swing the gate by hand with the opener disengaged. If it’s heavy, dragging, or binding at the hinges or the post, that mechanical problem gets fixed before we touch electronics. A Ghost Controls opener is not designed to fix a broken gate.
- 2
We write down the model number and service date. You’ll get that record, and so do we. It makes the next repair faster and keeps your warranty paperwork straight.
- 3
We diagnose against the symptom, not the guess. We test power at the board, the transformer, the battery, and the remote receiver. We don’t swap parts hoping.
- 4
We show you the written price before we order or open anything. OEM Ghost Controls parts when they make sense, quality aftermarket when they don’t, and you decide. No pressure, no surprise.
- 5
We repair, test fifty cycles, and clean up. We run the gate fully open and closed at least fifty times. Then we photograph the work area and hand you the written record.
- 6
We stand behind the repair. Every Ghost Controls repair carries the 365-Day Done Right Promise. If it isn’t right, we make it right. No argument, no fine print.
See the difference
Before
After
Before
After
Before
AfterWhat Ghost Controls Electric Gate Repair Costs in San Antonio
Here’s what San Antonio homeowners can expect to pay for common Ghost Controls repairs. Every job is different, but these ranges hold true for most single-family residential gates in the area:
- Remote or keypad reprogramming: $85 to $150
- Safety sensor replacement or realignment: $120 to $210
- Control board replacement (AXD, AXDP, REX series): $260 to $480
- Arm actuator replacement: $285 to $520
- Battery backup replacement: $150 to $260
What moves the price: whether it’s one component or a cascade of failures, how far the gate sits from the house power, and whether the gate itself needs mechanical work before the opener can run right. You’ll see the exact number in writing before we touch anything. Estimates are free. Call (325) 252-5195 and we’ll come look.
Why San Antonio Homeowners Call Latch and Post Gate Repair San Antonio for Ghost Controls Work
Most San Antonio gate companies will take a Ghost Controls call, but only if they can’t fill the day with something simpler. We’re different. Ghost Controls is one of the brands we actually train on, and we service LiftMaster, Mighty Mule, and DoorKing as backup when a change makes more sense. Every visit includes shoe covers and drop cloths, a written price before work begins, and a cleanup photo before we leave. Our techs ask before moving anything on your property and respect nap times and quiet hours. We’re part of the Cedarwell family of gate specialists, and Cody Beckman has been working gates across the Southwest for the better part of two decades. Get it right once, and you won’t have to think about it again.
FAQs
No. As an independent Ghost Controls service provider, our repairs use OEM parts when they’re the right call, and we document everything. Ghost Controls warranties cover manufacturing defects, and an independent repair does not automatically void that coverage. If your opener is under warranty, we’ll tell you whether the right move is a warranty claim or a faster paid repair.
Most Ghost Controls repairs in San Antonio are scheduled within one to two business days, and we carry common parts like remotes, sensors, and select boards on the truck. The repair itself usually takes one to two hours. Call (325) 252-5195 and we’ll get it on the calendar.
If the arm actuator and control board are both gone, replacement often makes more sense. If one component failed and the gate itself moves freely, repair usually costs a third of a new opener. We’ll show you the repair number and the replacement number side by side, and let you decide. No pressure.
Both. For control boards and specific series arms, Ghost Controls OEM parts are the reliable option and we recommend them. For remotes, sensors, and some batteries, quality aftermarket parts deliver the same function at a lower price. We’ll explain the trade-off on every part before we order anything.
That’s usually a safety sensor alignment issue or a mechanical bind in the gate hinges. When the opener senses extra resistance, Ghost Controls logic tells it to reverse as a safety measure. We find the true cause rather than just disabling the sensor, because the safety function is there for a reason. Call (325) 252-5195 and we’ll diagnose it properly.
Written by Cody Beckman, Owner, Latch and Post Gate Repair San Antonio at Latch and Post Gate Repair San Antonio, serving San Antonio and nearby areas.