Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Alamo Heights, TX
Alamo Heights gate work is different from the rest of San Antonio because the gates here are often original to homes built between 1920 and 1950, and they’re usually ornamental iron or steel set into limestone or brick columns. The hot, humid summers stress automation components, and the clay-heavy soil shifts enough through wet and dry cycles that gates drift out of alignment. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus on the latch, the post, and the operator that moves the gate. Call (325) 252-5195 any time, and a live person answers.
Why Alamo Heights Homes Are Different
Alamo Heights has a housing stock you won’t find in newer San Antonio suburbs: early 20th-century cottages, stately 1920s-1950s mansions, and a handful of custom builds. The gates on these properties are frequently ornamental wrought iron or steel, and many original installations are now reaching an age where hinges sag, latch posts lean, and underground operator vaults collect water. We see older estates where the original underground vaults flood during spring downpours, a problem that’s specific to the drainage patterns here and rare in neighboring cities.
The climate does its own work, too. Alamo Heights summers run hot and humid, and that heat can push gate automation boards and motors past their limits. Severe thunderstorms and the occasional lightning strike take out control boards. Then the clay-heavy soil expands and contracts with moisture, which is why a gate that latched fine in March may drag across the driveway by August. Every repair we do in Alamo Heights accounts for that soil movement and the weight of older iron gates mounted on stone columns.
Styles & brands we work with
Our Main Alamo Heights Services
Most Alamo Heights homeowners reach out to us for one of two reasons: a gate that no longer opens, closes, or latches properly, or a plan to replace an aging gate with something that matches the home’s character.
Gate Repair in Alamo Heights
Repair work in Alamo Heights often means restoring function without disturbing the original look. We realign sagging iron gates, rebuild or replace latch posts that have shifted in the clay soil, and replace worn hinges and latch hardware on gates mounted to brick or limestone columns. When an older estate gate has settled, we address the post footing and the gate leaf together so the fix holds through the next wet and dry season. See the full scope on our Gate Repair in Alamo Heights page.
Gate Installation in Alamo Heights
A new gate in Alamo Heights needs to look like it belongs to the house, not like a catalog add-on. We install ornamental iron and steel gates on new or existing columns, set posts to account for clay soil movement, and match the hardware finish to the home’s style. For older properties, we work with gate designs that respect the period, and we plan the operator location so it stays discreet. All pricing is written and agreed before any work starts. Learn more on our Gate Installation in Alamo Heights page.
Electric Gate Repair in Alamo Heights
Automated gates in Alamo Heights fail for predictable local reasons: heat-stressed motors, lightning strikes to control boards, and flooded underground operator vaults after heavy spring rain. We diagnose the operator, the safety edges, and the power run, then repair or replace only what’s needed. Homeowners here value quiet operators that don’t clank through the neighborhood at 6 a.m., so we match repairs to that standard. Details are on our Electric Gate Repair in Alamo Heights page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Alamo Heights
Our technicians are factory-trained on the equipment Alamo Heights families actually have, including Linear, Viking, Ghost Controls, and DoorKing. We keep common parts stocked for these brands so most repairs don’t stall waiting on a shipment. See our brands for the full list we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Alamo Heights, TX
Every job in Alamo Heights gets a written price before work begins. The table below shows typical ranges for the sub-jobs we handle most often in this area.
| Service | Typical range in Alamo Heights |
|---|---|
| Standard gate-latch replacement | $120 – $250 |
| Sagging or misaligned gate realignment | $150 – $350 |
| Weld repair on ornamental iron gate | $180 – $400 |
| Hinge and hardware replacement | $140 – $320 |
| Lean or shift correction (post reset) | $300 – $650 |
| Operator motor replacement | $400 – $1,100 |
| Control board replacement | $250 – $600 |
| Safety edge or photo eye replacement | $150 – $350 |
| Flooded underground vault remediation | $350 – $800 |
| Full automation system on existing gate | $1,200 – $3,500 |
Prices in Alamo Heights push toward the higher end when the gate is especially heavy or ornate, when stone or brick column repair is involved, or when a flooded vault needs drainage work before the operator can be replaced. We tell you the exact number in writing before we touch anything, and that number doesn’t change unless you approve a change first.
Neighborhoods We Serve in Alamo Heights
We work throughout Alamo Heights and the immediate surrounding streets. Most repair calls get a same-day or next-day visit, and we’ll give you a specific arrival window when you call.
- The estates along Argyle Avenue and the Cambridge Oval area
- The cottages and older homes near Broadway and the McNay district
- The streets around Alamo Heights Boulevard and Patterson Avenue
- Homes near the Olmos Basin edge, where drainage affects gate posts
- The newer custom builds on the northern end toward Terrell Hills
Service Area – Cities Near Alamo Heights
Our Alamo Heights crews also cover nearby communities. We serve San Antonio, TX, New Braunfels, TX, Boerne, TX, and Windcrest, TX. Dispatch and scheduling are coordinated from our San Antonio office, and the technician who arrives at your gate is background-checked and uniformed.
Serving Alamo Heights, TX - Our Local Coverage Area
We’re based in the Alamo Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Alamo Heights
Most Alamo Heights repair calls get a same-day or next-day visit, and we coordinate dispatch from our San Antonio office so the nearest available technician reaches you quickly. When you call (325) 252-5195, a live person answers and gives you a real arrival window, not a four-hour guess.
Simple repairs and like-for-like hardware replacement typically don’t require a permit in Alamo Heights, but new gate installations and work on columns or footings may fall under city review. The requirements vary by scope and street, so we help you confirm what’s needed before work begins rather than leaving you to sort it out alone.
Yes, and that’s common across Alamo Heights. We regularly repair and replace gates mounted on limestone or brick columns, including resetting posts where the clay soil has shifted. The written quote covers the column work if it’s needed, so there’s no surprise line item after the fact.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Alamo Heights Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"Good repair on a sagging gate. Part for the older motor took a few days, so two trips, but they explained it and were tidy and polite each time. Gate works smoothly now."
- Carmen Ulloa"Nice work on a sagging gate and a new hinge. The part took a few days so it was two trips, but they explained it and were tidy and polite each time."
- Marco Tillman