Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Converse, TX
Gate work in Converse, TX follows a different script than it does in most of the San Antonio area. The homes are newer, the lots sit on black clay that moves more than people expect, and the gates themselves are often the original builder units that were never really meant to carry the heavy ornamental steel homeowners add later. We’re Latch & Post Gate Repair, a Cedarwell-family gate specialist, and we handle gate repair, gate installation, and electric gate repair across Converse. Call (325) 252-5195 any time and a live person picks up.
Why Converse Homes Are Different
Most of Converse is 1990s to 2010s suburban construction, much of it inside large master-planned communities where the gates were standardized and the automatic openers were often added later, almost as an afterthought, on narrow driveway easements. That matters because the equipment was rarely matched to the gate it operates. In many Converse subdivisions the original openers are undersized for the heavy ornamental steel gates homeowners add years later, so the first big summer heat wave brings a wave of burned-out motors and stripped gears.
The soil is the other thing. Converse sits on post-tension slab foundations over black clay that expands and contracts dramatically with seasonal rainfall. When the clay shifts, gate posts tilt a few degrees, latch bars stop lining up, and operator arms bind. We see the same pattern across Converse every time the ground goes through a wet-to-dry cycle. Add the thermal expansion from intense summer heat and the occasional freeze event cracking welds, and you get gates that work fine for six months and then suddenly will not close. That’s the Converse problem set, and it’s one we know how to read.
Styles & brands we work with





Our Main Converse Services
Most Converse homeowners call us for two things: a gate that won’t open or latch, and a full replacement when the old builder unit has finally had enough. Here’s how each works in Converse, with a dedicated page for the details.
Gate Repair in Converse
A sagging gate in Converse usually comes down to post movement in the clay or a hinge pulling out of the post. We fix the post, replace or reface what’s worn, and adjust the latch so it catches cleanly. If the gate scrapes the driveway every afternoon but not in the morning, that’s the clay doing its thing, and the fix usually involves resetting hinge alignment. We write the price before we touch anything, and our technician wears shoe covers and puts down drop cloths if the work takes us inside. See the full breakdown on our Gate Repair in Converse page.

Gate Installation in Converse
New gate installations in Converse need to account for the soil movement from day one. We set posts deeper than the original builders typically did and size the opener for the actual weight of the gate, not the weight the seller guessed. That matters more here than in newer San Antonio suburbs where the clay shifts a little less aggressively. Every installation includes a written quote before work begins, and the 365-Day Done Right Promise covers the whole thing. The full step-by-step is on our Gate Installation in Converse page.

Electric Gate Repair in Converse
When a gate opener quits in Converse during July, it’s often an undersized motor meeting an oversized gate. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we’ll tell you straight whether the motor can be saved or if the long-term answer is a properly sized replacement. Quiet tools and scheduling around nap time are standard if you ask. Details and symptom help live on our Electric Gate Repair in Converse page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Converse
We’re factory-trained on the brands Converse families actually own: LiftMaster, DoorKing, Elite, and Mighty Mule among them. We keep common parts in our local stock, which shortens turnaround on most repairs. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Converse, TX
| Service | Typical range in Converse |
|---|---|
| Gate latch replacement | $125 – $275 |
| Hinge replacement (pair) | $180 – $385 |
| Gate post reset / re-secure | $220 – $450 |
| Sagging gate realignment | $150 – $325 |
| Weld repair (cracked joint) | $90 – $220 |
| Opener motor replacement | $300 – $650 |
| Opener gear / drive replacement | $175 – $360 |
| Safety sensor repair or replacement | $120 – $250 |
| Keypad or remote programming | $85 – $160 |
| Full installation (standard single gate) | $1,850 – $4,200 |
What pushes a Converse job toward the high end is usually clay-related post movement that needs a full reset, or a heavy ornamental gate that needs a bigger opener than the original. Whatever the number, you’ll see it in writing before any work starts, and you’ll agree to it before we pick up a tool. No surprises.
Neighborhoods We Serve in Converse
We work throughout Converse, from the older streets near FM 1516 to the newer master-planned communities along the Loop 1604 edge. Most calls get a same-week visit, and urgent gate failures are handled as fast as our schedule allows.
- Northampton
- Escondido
- Bentwood
- Paloma
- Copperfield
Service Area – Cities Near Converse
We’re based out of the brand’s San Antonio office, and our crews serve Converse locally. If you’re nearby, we also cover San Antonio, TX, New Braunfels, TX, and Boerne, TX. Same live-answer phone line, same written-price promise.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Converse
Most Converse calls are scheduled within the same week, and we prioritize gates that won’t close at all since that leaves the backyard and everything in it exposed. Call (325) 252-5195 and our dispatcher will give you a straight answer on timing for your neighborhood.
Some Converse communities have design review for visible changes like a full gate replacement or a new opener arm. Repair work on existing equipment almost never triggers anything. We’ll flag anything that might need approval before quoting, and we’ll work within your HOA’s rules if your neighborhood has them.
You get a person. Our phone line is answered live 24 hours a day, 7 days a week, including nights, weekends, and holidays. No voicemail, no callback queue. If you call (325) 252-5195, a human answers.
If you need gate work in Converse, call (325) 252-5195 for a free estimate. One call, a straight answer, and a written price before anything gets touched.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Converse Customers Say
"Good repair on a sagging gate. Part for the older motor took a few days, so two trips, but they explained it and were tidy and polite each time. Gate works smoothly now."
- Carmen Ulloa"Nice work on a sagging gate and a new hinge. The part took a few days so it was two trips, but they explained it and were tidy and polite each time."
- Marco Tillman"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon