Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Leon Valley
When an electric gate stops opening in Leon Valley, it’s rarely just the motor. It’s usually the clay soil under the post, a rusted hinge on a 40-year-old iron frame, or a control board that hasn’t been made since 1995. We handle all of it. Latch and Post Gate Repair San Antonio has crews working throughout Leon Valley every week, and we coordinate dispatch from our San Antonio office so someone reaches you quickly. Call (325) 252-5195 and a live person answers, any hour of the day or night.
Why Latch and Post Gate Repair San Antonio Is Leon Valley’s Preferred Electric Gate Repair Company
We’re a Cedarwell-family gate specialist, not a general handyman who also knows a little about openers. Electric gate work is all we do. That focus matters in Leon Valley, where many gates were hung decades ago and their operators have been patched together with parts that no longer meet modern safety standards. Our technicians are factory-trained on Viking, Ghost Controls, DoorKing, and Elite, plus several other common brands, so the repair gets diagnosed right the first visit.
Cody Beckman has built our reputation on one simple practice: we tell you the written price before any work begins. Every single visit. No pressure, no fine print. If the gate isn’t right after our repair or installation, the 365-Day Done Right Promise means we make it right. That’s the whole promise.
Homeowners in Leon Valley consistently tell us the same thing: the crew showed up in uniform, put on shoe covers, laid down drop cloths, and sent a photo of the clean-up before leaving. That’s the Cedarwell C.A.R.E. routine, and it’s included on every job, not an extra charge. Your floors stay clean, your kids nap undisturbed, and you know the exact price before we touch a single bolt.
Styles & brands we work with
Commercial Gate Operator in Leon Valley
A Commercial Gate Operator in Leon Valley is the motor and drive system that opens and closes a gate automatically. On local ranch homes from the 1960s through the 1980s, many of these units are original equipment. They’re worn, loud, and often lack the safety reversing edges and photo eyes required on modern installations. A commercial-grade operator retrofit on a wide Leon Valley driveway typically runs $1,200 – $2,600, depending on whether we can reuse the existing track and mounting plate. If the control board and power supply also need replacing, expect the higher end of that range.
Legacy operator retrofits
Many Leon Valley gates run on controllers that were discontinued 15 or 20 years ago. When one fails, the question is whether to retrofit or replace. We can often fit a modern Viking or DoorKing operator to the existing gate frame, which saves money and avoids a full structural rebuild. The retrofit includes new safety sensors and a fresh power run if needed.
Post shift and operator overload
Expansive clay under Leon Valley driveways shrinks and swells with rainfall. When a gate post shifts even half an inch, the operator has to work harder, the motor runs hot, and the gear train strips. Before we replace a motor, we check whether the real problem is a moving post that needs resetting in fresh concrete. Fixing the post first means the new operator lasts, instead of burning out in 18 months.
Gate Opener Repair in Leon Valley
Gate Opener Repair in Leon Valley usually comes down to one of three things: a failed capacitor, a worn drive gear, or a control board that finally quit. These aren’t exotic failures. They’re what happens when a lift motor has been cycling two or three times a day for 20 years in Texas heat. The repair typically lands between $180 and $450 for parts and labor on a common swing-gate opener. If the operator uses a screw-drive or ram-arm mechanism that’s no longer made, we’ll walk you through replacement options with a written price before moving forward.
Motor diagnosis and replacement
When a motor hums but the gate doesn’t move, the issue is often a bad start capacitor or a stripped plastic gear, both routine repairs. When the motor itself is seized, replacement is the honest answer. We quote the repair and the replacement side by side so you’re not spending money twice.
Keypad, remote, and safety sensor faults
Leon Valley homeowners often arrive home to a gate that won’t respond to the remote. Sometimes it’s the remote battery, but just as often it’s a failing receiver board or a sensor that’s been knocked out of alignment by a mower or a delivery truck. We test each component in order so we fix the actual cause, not just the symptom.
Trusted Brands We Service in Leon Valley
We stock and service Viking, Ghost Controls, DoorKing, and Elite openers, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Because we’re on the road across Leon Valley and San Antonio every day, our trucks carry common boards, gears, and remotes for these brands. That means fewer second trips and less waiting for parts. If you have an older DoorKing on a welded iron frame off Bandera Road, we know that unit. If it’s a Ghost Controls on an aluminum drive gate near the Leon Valley Public Library, we know that one too.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Leon Valley Homes
- Post shift from expansive clay. The same soil that cracks Leon Valley sidewalks also moves gate posts. A shifting post binds the gate leaf and overloads the opener gears, often long before the homeowner notices the gate dragging on the ground.
- Hinge rust and weld fatigue. Iron driveway gates that are 30 to 60 years old have hinges that rust from the inside out, especially in humid summers. A sagging gate panel is usually the hinge and post, not the panel itself, and welding a new hinge in place restores the swing before the opener gets damaged.
- Obsolete control boards. Many original operators around Leon Valley were installed before modern safety standards. When old boards fail, they often can’t be repaired, only replaced with a retrofit kit that includes current safety edges and photo eyes. We handle this as a standard job, not a science project.
- Cantilever gate counterbalance failure. Off Evers Road and similar older neighborhoods, original cantilever slide gates have lost their counterbalance springs. After a hard summer thunderstorm softens the clay under the track support, the gate can slide unchecked into the end post and bend its own frame.
Our crew realigned a 1980s cantilever slide gate off Evers Road after a summer thunderstorm softened the clay and shifted the track support. The original counterbalance springs had rusted through, so we fitted new ones and reset the post footing before the gate could crash into the end post again. That’s a routine Thursday for us in Leon Valley, and it’s why we check the post and the track before we ever touch a motor.
Pricing for Electric Gate Repair in Leon Valley, TX
Here’s what our customers in Leon Valley typically pay. A standard opener repair, like a new capacitor or limit switch, runs $140 – $320. A control board replacement lands between $250 and $600, depending on the brand and whether it’s a retrofit. A full operator replacement, including brackets and safety sensors, runs $950 – $2,300 on most Leon Valley single-family gates. Post resetting, which we recommend whenever a gate drags or binds, adds $300 – $750 depending on footing size and concrete work. You’ll see the exact number in writing before we start, and that number doesn’t change unless you approve a scope change. Estimates are free. Call (325) 252-5195 to schedule one.
We Also Serve Cities Near Leon Valley
Our Electric Gate Repair team works throughout Leon Valley and the surrounding area, including San Antonio, New Braunfels, Boerne, and Alamo Heights. If you live in one of those communities, we can schedule a visit the same way we do in Leon Valley, with the same written price and the same care routine.
Serving Leon Valley, TX - Our Local Coverage Area
We’re based in the Leon Valley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Leon Valley
Expansive clay shrinks during dry spells and swells after rain, which slowly tilts gate posts out of level. A post that moves even half an inch binds the gate leaf, forces the opener to strain, and eventually strips the gears. We reset posts in concrete with proper footings, and on older Leon Valley homes this is often the permanent fix. Call (325) 252-5195 if your gate has started dragging or making a grinding sound.
Yes. We regularly retrofit older Viking, DoorKing, and Elite operators around Leon Valley with current photo eyes and reversing edges. This brings the gate up to modern safety expectations without replacing the entire motor if the motor is still healthy. We quote the retrofit as a single line item so you can see exactly what it costs.
The counterbalance springs on many original Leon Valley cantilever gates have rusted away. Without them, the gate is uncontrolled when the track shifts, and it picks up speed and slams into the end post. We replace the springs and reset the track supports, which stops the crash instead of just repairing the dent. Call (325) 252-5195 and we’ll take a look.
Usually the post and the hinge, not the panel. Iron gate panels are heavy but rigid; they sag when the hinge welds fatigue or the post has leaned. We can weld a new hinge and reset the post in a day, which restores the gate’s swing and protects the opener from working against gravity. A written quote covers both.
We service Viking, Ghost Controls, DoorKing, and Elite, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Our trucks carry common parts for these brands, and we’re factory trained on each one. If you’re not sure what brand you have, call (325) 252-5195 and we’ll identify it during the visit.
If your gate is sagging, grinding, or simply not opening, call (325) 252-5195. We’ll send a background-checked, uniformed technician to your home in Leon Valley, give you a written price before any work starts, and respect your floors, your time, and your family’s quiet. That’s how it should work every time.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Antonio, coordinating service in Leon Valley.