Ghost Controls Gate Installation Nationwide

Ghost Controls Gate Installation in San Antonio: What to Know First

We install and service Ghost Controls gate systems throughout San Antonio as an independent provider, which means we’re not bound by a manufacturer’s script and we won’t push you toward a replacement you don’t need. Most Ghost Controls installations take one full day, and every job starts with a written price before we touch anything. We’re honest about what a Ghost Controls system does well, what it does poorly, and what’s worth spending money on in this climate. If you own Ghost Controls equipment and need it installed, repaired, or replaced, call (325) 252-5195. This page is for homeowners who want specifics, not a sales pitch.

Call (325) 252-5195

How Ghost Controls Products Fail – and How We Fix Them

• AXDP series swing arm operators losing limit settings after power bumps. San Antonio’s summer storms knock power out often enough that we see this constantly. The control board forgets its open and close stops, the gate slams into the post or stops short. The fix is reprogramming the limits and, where the property’s electrical setup allows, adding a surge suppressor at the outlet. Ten minutes in the field beats a four-day return trip to the factory.
• TSS1 and TDS1 control boxes filling with condensation. These aren’t sealed boxes. In San Antonio’s humidity swings between March and October, moisture collects inside, the board corrodes, and the gate won’t respond to the remote one morning. We drill a small drain hole, replace the corroded terminal connections, and mount the box so it’s not facing the afternoon sun. Ghost Controls doesn’t mention the drain hole in their manual. We do it because it prevents the third callback.
• Plastic gear wear on the GLD series slide operators. The gear that moves the chain on the GLD slide kits wears faster in heat, and San Antonio’s sun bakes everything that sits unprotected. You’ll hear a grinding noise before the gate stops moving entirely. We replace the gear with the OEM part when the operator is still under warranty, and with a durable aftermarket gear when it isn’t. The aftermarket option costs less and often lasts longer in our experience.
• Photo eyes wired backward or knocked out of alignment on new installs. We see DIY Ghost Controls installs where the photo eye at the gate’s edge got hit by a lawn mower or a delivery truck, and the gate refuses to close. The owner assumes the board is dead. Half the time it’s the photo eye. We test before we replace, which saves people money they didn’t need to spend.
• Arm attachment brackets bending on double swing gates. Ghost Controls dual-gate kits use a shared arm system, and on heavier gates the bracket where the arm meets the gate leaf flexes. The gate sags, the arm works loose, and the open and close cycle gets loud. We reinforce the bracket and rebalance the gate leaf so the operator isn’t doing the gate’s job. The operator should move the gate, not hold it up.

Our Ghost Controls Gate Installation Process

We don’t rush a Ghost Controls job, and we don’t make you guess what’s happening. Here’s how it goes from the first call to the final walk.

1. 1
   You call, a person answers. Not a voicemail. A live person at (325) 252-5195 who asks what the gate is doing, what model you have if you know it, and when we can come look.
2. 2
   We inspect the gate, the post, and the operator. Before quoting anything we check the gate’s weight, the post’s condition, the power source, and how the Ghost Controls unit was wired. Most failed Ghost Controls installs in San Antonio aren’t failed operators. They’re failed preparation.
3. 3
   We hand you a written price. The number says exactly what we’ll do, what parts we’ll use, and what it costs. You approve it before we open the truck. If you don’t approve it, we leave and you owe nothing.
4. 4
   We do the work with shoe covers and drop cloths in place. If the gate runs near a finished garage or a path through the house, we protect the floor and the nearby surfaces. Quiet tools if kids or pets are asleep inside.
5. 5
   We test the full cycle with you watching. Open, close, obstruction stop, remote range, keypad entry if you have one. We don’t call it done until you’ve seen it work.
6. 6
   We photograph the cleanup and leave you the record. Cody Beckman writes the model number and service date on a note for your files. You get the 365-Day Done Right Promise on the work. If it isn’t right, we make it right.

What Ghost Controls Gate Installation Costs in San Antonio

Straight numbers, because that’s what we’d want if we were calling about our own gate.

• Single swing gate with one Ghost Controls AXDP operator: $1,400 to $2,200 installed, including the operator, arm, bracket, and programming.
• Dual swing gate with two operators: $2,600 to $3,800 depending on gate weight and post depth.
• Sliding gate with GLD series operator and chain: $1,900 to $3,100, with the higher end covering longer chain runs and gate sizes over 16 feet.
• Pedestrian gate install only, no automation: $500 to $950 for a standard steel pedestrian gate hung on existing posts.
• Operator replacement on an existing gate: $900 to $1,600, which includes removing the old Ghost Controls unit, installing the new one, and wiring the existing photo eyes and keypad.

What moves the price is gate weight, post condition, distance from the nearest outlet, and whether the old operator’s wiring can be reused. You’ll see the exact number in writing before we start. Call (325) 252-5195 for a free estimate, and we’ll come measure.

Why San Antonio Homeowners Call Latch and Post Gate Repair San Antonio for Ghost Controls Work

We’re gate specialists, not a handyman service that happens to own a drill. Gate installation is one of the three things we do, and we’ve been doing it since 2009 as part of the Cedarwell family of independent gate specialists. Every technician is background-checked and factory-trained on the brands families actually own: Ghost Controls, LiftMaster, Mighty Mule, DoorKing, and the rest. If a Ghost Controls unit turns out to be beyond saving, we can talk straight about what those brands cost and how they compare before you spend a dollar. And every job carries the Cedarwell Care Promise: written price before work starts, shoe covers and drop cloths on every visit, and a cleanup photo before we leave. That’s not an upsell. It’s how every visit works.

FAQs

Can you install a Ghost Controls opener on a gate that another company hung?
+

Does installing a Ghost Controls opener void the gate’s warranty?
+

How fast can you get Ghost Controls parts in San Antonio?
+

Should I repair my Ghost Controls opener or just replace it?
+

Do you handle the power run and the photo eyes?
+

Call Latch and Post Gate Repair San Antonio for Your Ghost Controls Gate Installation

If your Ghost Controls gate needs installation, repair, or an honest second opinion, call (325) 252-5195. A live person answers around the clock, and we’ll schedule a visit at a time that works for your household, kids and pets included. You’ll get a written price before we start, clean floors when we leave, and a gate that works the way it should.

Written by Cody Beckman, Owner, Latch and Post Gate Repair San Antonio at Latch and Post Gate Repair San Antonio, serving San Antonio and nearby areas.