Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in New Braunfels, TX | Latch and Post Gate Repair San Antonio
If your Ghost Controls gate opener is acting up in New Braunfels, we can help. Latch and Post Gate Repair in New Braunfels provides independent Ghost Controls service across the area, and the one thing that makes our work here different is simple: we know how limestone pillars and expansive clay soils treat these openers over time. Most Ghost Controls failures we see in this area aren’t electrical gremlins, they’re mechanical problems created by the ground moving under the gate. Call (325) 252-5195 and we’ll send a technician who actually understands both the opener and the terrain it’s mounted to.
Why New Braunfels Residents Choose Us for Ghost Controls Service
We work on Ghost Controls openers every week, across the full residential line: TDS2, AXDP, solar kits, vehicle sensors, and keypad systems. Cody Beckman, our owner, started in metalwork and mechanical systems at Los Angeles Trade-Technical College and spent two decades working gates and openers across the Southwest before putting down roots in the San Antonio area. That matters when your Ghost Controls opener is mounted on a limestone pillar in Gruene that’s been slowly tilting for fifteen years. We’re an independent service provider, not a manufacturer-authorized dealer, which means we can recommend the right fix honestly, including when a heavier-duty aftermarket bracket makes more sense than another factory part. The goal is always the same: get the gate working and keep it working through New Braunfels heat, thunderstorms, and soil shifts. That’s why we back every repair with our 365-Day Done Right Promise, and you’ll get a written price before any work begins. You can reach a live person at (325) 252-5195 any hour, any day.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in New Braunfels
- Control boards shorting after thunderstorms. When a gate post shifts even a quarter inch in New Braunfels clay, the wiring can pinch against limestone and short the board. We trace the circuit before replacing anything, so you’re not paying for a board that’ll fail again next storm.
- Solar openers losing charge in shaded drives. The humid, partly shaded lots in Gruene and Creekside are hard on Ghost Controls solar kits. Thin cloud cover plus humidity cuts panel output more than people expect, and the battery never fully recovers. We’ll test the panel angle and charge curve, then tell you honestly if the panel needs repositioning or the battery needs replacing.
- Gate arm brackets snapping at the pillar. Expansive clay means the ground swells after rain and shrinks in drought. When a limestone pillar leans, the Ghost Controls arm takes the stress at its mounting point. We’ve seen factory brackets snap clean off. We replace them with heavier steel and re-anchor into the stone properly.
- Hinge bolts loosening over time. New Braunfels goes through wet-dry cycles that work bolts out of place. A loose hinge makes the opener fight the gate’s weight, which burns out motors early. We check every anchor point, not just the opener itself.
- Keypads and receivers overheating on west-facing posts. Full afternoon sun on a steel gate post can push surface temps past what those electronics are built to handle. We remount them with a shaded shield or relocate the receiver, so the keypad stops going dead every August.
Ghost Controls Service in New Braunfels: What Local Conditions Mean for Your Equipment
New Braunfels sits on the Balcones Fault Zone, and that’s not just geology trivia, it’s the single biggest factor in how Ghost Controls openers fail here. In the Gruene and Rivercrest areas, many limestone gate pillars are load-bearing, not decorative. When clay soils expand after a storm, the entire pillar can tilt, and that tilt translates directly into torque on the opener arm. We’ve seen the arm tear its bracket out of the stone, leaving the gate hanging and the opener dead. That’s why we always inspect the pillar-to-mount interface, not just the opener itself. A tech who only checks voltage and travel limits will miss the root cause, and you’ll get repeat failures. We check the pillar, the anchors, the arm geometry, and the board, in that order, and we carry extra-long masonry bits for drilling into Edwards Plateau limestone, which eats standard bits like butter.
One call off Gruene Road still sticks with us. A Ghost Controls TDS2 on a double swing gate kept tripping its obstacle sensor after heavy rain. The left limestone pillar had settled about half an inch, pulling the opener arm out of alignment, and the factory hinge bolts were rusted into the stone. We bored out the old anchors, reset the pillar base with compacted gravel, and installed thicker stainless brackets before reprogramming the travel limits. That gate has run clean for eight months. Get it right once, and you won’t have to think about it again.
Ghost Controls Models & Products We Service in New Braunfels
We service the full residential Ghost Controls line: TDS2 and AXDP openers, solar panel kits, vehicle sensor systems, and keypad access systems. When it comes to parts, we take a straightforward approach. For control boards, sensors, and motor gears, we use genuine Ghost Controls parts whenever possible. Aftermarket electronics often fail early under New Braunfels heat and humidity, and a board that dies in fourteen months isn’t a bargain. For mechanical brackets and hinges, we’ll often recommend heavier-duty aftermarket steel if the original hardware was under-spec for a long ranch gate. That’s an honest call we make case by case. We also stock common Ghost Controls components locally, which means faster turnaround for New Braunfels customers than shipping parts from out of state. For full Ghost Controls sales & service, we’re your local independent option.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in New Braunfels
Every Ghost Controls job starts with a free estimate and a written price before any work begins. What you’ll pay depends on what’s actually wrong. A sensor alignment or travel limit reset is typically under $150. A control board replacement usually runs $285 to $475, depending on the model. A full opener swap with new brackets and wiring starts around $750 and goes up with gate size and pillar work. The written price you see is the price you pay, agreed before we touch anything. If the repair costs more than our Gate Installation in New Braunfels makes sense, we’ll tell you that too, rather than patching a board that’ll fail again next spring. Call (325) 252-5195 for an exact quote, estimates are free.
Serving New Braunfels, TX - Our Local Coverage Area
We’re based in the New Braunfels area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in New Braunfels
Thunderstorm season here brings two problems at once: cloud cover cuts solar input, and expanding clay shifts the gate just enough to increase friction. The opener’s battery drains faster while the motor works harder, and the system falls behind. We test the battery’s charge retention and the gate’s mechanical resistance separately, because the fix depends on which one is actually failing. Call (325) 252-5195 and we’ll diagnose it without guessing.
In most cases we can repair the mount without replacing the pillar. We bore out the old anchors, reset the bracket with proper hardware, and compact the base if it’s settled. Full pillar replacement is only needed when the stone itself is cracked through or the footing has failed completely, and we’ll show you what we’re seeing before recommending anything that drastic.
A battery problem shows up as intermittent operation, the gate starts sometimes and not others, or it moves slower than usual. A board problem often follows a storm or power surge and shows no response at all, or random error codes. We bench-test both before selling you either part. That’s the difference between a $40 battery and a $300 board, and we’d rather find out the cheap way.
Creekside homes are newer, but the soil is still New Braunfels clay, and new builds settle fast in the first three years. We recommend checking gate post plumb and hinge tightness at least once a year, especially after the first wet-dry cycle. If your builder installed the opener on a lightweight steel post, we may suggest a concrete fill or heavier brackets before the post leans enough to damage the opener. Call (325) 252-5195 and we’ll check it properly.
Limestone walls and the river bluff both block radio signal. The remote’s signal can’t penetrate solid stone at a distance, especially when the receiver is mounted low or behind a steel post. We relocate the receiver antenna higher, or add an external antenna, which usually solves it without replacing the remote or the board.
Service Areas Near New Braunfels
We cover New Braunfels and the surrounding area, including San Antonio, Boerne, Alamo Heights, Windcrest, and Castle Hills. For customers west of here, see Ghost Controls service in Boerne. For those closer to the city, we have Ghost Controls service in San Antonio. Our full New Braunfels service area page covers the details.
Book Your Ghost Controls Service in New Braunfels Today
Call (325) 252-5195 for a free estimate on any Ghost Controls repair in New Braunfels. A live person answers, day or night, and we’ll get a technician scheduled quickly. Written price first, clean work, and a gate that stays fixed.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Antonio, serving New Braunfels since 2009.