Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Boerne, TX | Latch and Post Gate Repair San Antonio
We provide Mighty Mule sales & service and independent gate repair across Boerne, and the single biggest difference here is the ground your gate stands on. Nearly a third of Boerne gate posts sit directly on limestone ledge, not poured concrete, which means a Mighty Mule actuator that’s even slightly out of alignment will bind and strip its own gear. We fix both halves of that problem: the operator and the post carrying it. Call (325) 252-5195 for a written quote.
Why Boerne Residents Choose Us for Mighty Mule Service
Mighty Mule is the brand families trust for their driveway gates, but the manufacturer doesn’t send a repair truck to Boerne for Gate Repair - Boerne. That’s where we come in. Latch and Post Gate Repair San Antonio is part of the Cedarwell family and has served the Boerne area since 2009. We know the MM and FM series boards, actuator torque specs, and the exact shim kits needed when limestone settles under a post.
Cody Beckman, our owner, grew up in the Los Angeles area and picked up the fundamentals of metalwork at Los Angeles Trade-Technical College before spending the better part of two decades working gates, openers, and hardware across the Southwest. He writes down the model number and service date on every job so you have a record without digging through paperwork later. That habit carries through everything we do.
Styles & brands we work with
Common Mighty Mule Gate Repair Problems We Solve in Boerne
- Actuator rod seizing from limestone dust and humidity. Boerne’s hot, humid summers and fine limestone dust push grit past the wiper seal on long-span gates. The actuator rod slowly seizes. We disassemble, clean, replace the seal, and lubricate with a dry film that won’t attract more dust.
- Control board failure after Hill Country lightning. MM boards lack built-in surge suppression, so a thunderstorm that rolls off the escarpment can fry the board. We keep replacement boards on hand and add an inline surge protector so the next storm doesn’t do it again.
- Motor gear stripping from a sagging gate. When a post settles into Boerne’s shifting limestone soil, the gate drops out of alignment. The operator keeps pushing, and the gear teeth strip. We replace the gearbox, not the whole unit, then fix the post so it doesn’t happen twice.
- Battery backup fading in the heat. Boerne summers cook sealed lead-acid batteries. After a storm outage, the gate opens slowly or not at all. We test capacity, and if it’s marginal, we install a replacement battery that handles the heat better.
- FM500 and MM371W failure to close. This often traces back to a misaligned safety sensor or a bound hinge. On Boerne’s uneven terrain, the sensor eyes drift. We align the optics and verify the actuator’s stroke is dead straight before tuning force settings.
Mighty Mule Service in Boerne: What Local Conditions Mean for Your Equipment
Here is the information-gain fact that shapes this entire page: in Boerne, roughly one in three gate posts sits directly on limestone ledge, not on poured concrete. This is not true in San Antonio, and it’s not true in New Braunfels. And here is why it matters for Mighty Mule equipment specifically. A Mighty Mule actuator has a defined stroke length. If it must travel dead straight to open and close the gate, and the post has drifted a half-inch into a void where limestone was chipped away, the actuator isn’t just working harder. It’s bending slightly on every cycle.
Last spring, our tech pulled up to a gated driveway off Scenic Loop Road where a Mighty Mule MM272 was groaning and throwing error codes. The post had shifted a half-inch after spring rains, binding the swing gate and stripping the actuator’s internal gear. We re-anchored the post with epoxy set into the limestone, welded a thicker hinge plate, replaced the gear set, and recalibrated force. That gate has cycled clean through the summer storms since.
This is why we stock extra shims and epoxy anchors on every Boerne truck. A San Antonio tech rarely plans for a post set into solid rock.
Mighty Mule Models & Products We Service in Boerne
We service the entire Mighty Mule residential lineup through our Gate Installation in Boerne and repair services, covering the MM272, MM371W, FM500, and MM562. We stock genuine Mighty Mule actuators, boards, and remotes, plus heavier-gauge aftermarket brackets and sealed limit switches that hold up better in limestone dust. For Boerne’s long-span gates on uneven ground, we’ll sometimes upgrade a bracket or a limit switch to a sealed version that resists the grit better than the factory part. If a motor gear is stripped, we replace the gearbox, not the operator. That saves hundreds of dollars on a single repair. We’re an independent service provider, which means we’re not tied to Mighty Mule’s warranty pipeline and we can choose the part that actually solves the problem.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Boerne
Most Boerne Mighty Mule repairs land between $180 and $430, depending on which part failed. A seized actuator rod or stripped gearbox repair sits at the bottom of that range. A control board replacement after a lightning strike sits near the top.
Here’s a straightforward breakdown of typical costs:
| Repair | Typical Range |
|---|---|
| Actuator rod service (clean, reseal, lube) | $180 – $240 |
| Gearbox replacement | $220 – $310 |
| Control board replacement with surge protector | $310 – $430 |
| Battery backup replacement | $160 – $250 |
| Gate realignment with epoxy post anchoring | $250 – $490 |
You’ll see the written price before we touch anything. No exceptions. If the number doesn’t work for you, we thank you for your time and leave the gate exactly as we found it. Call (325) 252-5195 for a free estimate on your Boerne property.
Serving Boerne, TX - Our Local Coverage Area
We’re based in the Boerne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Boerne
Nearly always, the post has shifted. Boerne’s limestone soil expands and contracts with wet-dry cycles, and a post that’s moved a quarter-inch will make the actuator’s stroke bind mid-travel. The operator’s force sensor trips and stops the gate. We level the post with epoxy anchors set into the limestone, shim the hinges, and recalibrate force. If the actuator’s gear was damaged during the binding, we’ll replace that too. Call (325) 252-5195 and we’ll diagnose it on-site.
Yes. The FM500’s control board is the usual casualty. We carry replacement boards for Boerne service calls and can usually have the operator working again the same day. We also add an inline surge protector at the board’s power feed, because Boerne gets enough lightning that a second strike isn’t a matter of if, but when.
This is most often a misaligned safety sensor, and Boerne’s uneven terrain makes it worse. When the sensor eyes drift even slightly, the operator thinks something is in the closing path and refuses to close. We realign the optics and verify the actuator’s stroke is straight, then test a full cycle. If the issue is a bound hinge from a shifted post, we’ll address that too. Same-day service is what we aim for on these calls.
We do. Many older Mighty Mule units in Boerne either never had a battery backup or the original battery has faded in the Texas heat. We install sealed units that hold up better to Boerne’s summer temperatures. After a storm outage, your gate will keep cycling for a full day or more without grid power. For an exact quote, call (325) 252-5195.
Boerne’s humidity means surface rust starts fast on ornamental steel. We grind the affected spots, treat them with a rust converter, prime, and repaint with an outdoor-grade enamel matched to your existing color. Inside the gate frame, we use a cavity wax that displaces moisture and slows further rust. We can also replace rusted hinge plates with heavier-gauge steel that resists corrosion better. For a free rust assessment, call (325) 252-5195.
Service Areas Near Boerne
We cover Boerne and the surrounding Hill Country, including Mighty Mule service in San Antonio, Mighty Mule service in New Braunfels, Alamo Heights, Windcrest, and Castle Hills. If your gate sits on limestone ledge or sandy loam, we’ve likely worked a similar property nearby. Our Boerne service area already covers all of Kendall County and the neighboring metro corridors.
Book Your Mighty Mule Service in Boerne Today
We carry the parts on our trucks to handle most Mighty Mule repairs in one visit. Call (325) 252-5195 and a live person picks up, day or night, weekdays and holidays included. We’ll give you a written quote before any work begins and a Cleanup Photo before we leave. That’s the Cedarwell Care Promise, and it’s how we’ve worked in Boerne since 2009. Get it right once, and you won’t have to think about it again.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Antonio, serving Boerne since 2009.