Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in San Antonio?
Gate repair in San Antonio typically costs between $165 and $485 for most common fixes, with electric gate repairs running higher at $250 to $900+ depending on the opener and control board involved. A basic latch replacement or hinge adjustment on a residential swing gate usually lands in the $165 to $225 range, while a full operator replacement on an electric driveway gate can reach $1,200 to $2,800. You’ll see the exact number in writing before any work starts, which is how every Gate Repair services visit begins.
Several things move that number around: whether the gate is wood, steel, or ornamental iron, how it’s mounted, whether the post has shifted in San Antonio’s expansive clay soil, and whether the operator is a LiftMaster, FAAC, or a lesser-known brand with harder-to-source parts. The pricing below reflects what we’re seeing across San Antonio neighborhoods in 2026.
Gate Repair Cost Breakdown (2026)
Here’s what homeowners in San Antonio are paying for the most common gate repairs this year. These ranges include parts and labor, and they’re based on the jobs we actually run across Alamo Heights, Stone Oak, Terrell Hills, Helotes, and the surrounding areas:
| Repair Type | Typical Cost Range (Parts + Labor) | Notes |
|---|---|---|
| Gate latch or lock replacement | $165 – $240 | Standard residential latch; includes adjustment and alignment |
| Hinge replacement (pair) | $180 – $320 | Steel or ornamental iron gates; heavy-duty hinges run higher |
| Sagging gate correction | $195 – $385 | Includes cable/turnbuckle kit or post realignment where needed |
| Weld repair (ornamental iron pickets, frame cracks) | $150 – $400 | Per repair point; larger sections cost more |
| Gate wheel or caster replacement | $85 – $180 | Common on driveway gates and rolling gates |
| Post stabilization (loose or leaning post) | $300 – $650 | Depends on post size and whether new concrete is required |
| Electric gate sensor / photo eye replacement | $200 – $380 | FAAC, BFT, LiftMaster, and most common brands |
| Control board replacement | $350 – $750 | DoorKing, Viking, Elite, and Linear boards fall in this range |
| Gate opener arm replacement | $300 – $600 | Linear or LiftMaster swing arms; part cost drives range |
| Full electric gate operator replacement | $1,200 – $2,800 | Includes new motor/arm, programming, and safety sensor check |
| Keypad or intercom replacement | $250 – $550 | Includes wiring verification and reprogramming |
| Full gate installation (new residential gate) | $1,800 – $5,500+ | Depends on gate length, material, and post type |
What pushes a job toward the top of these ranges? Three things, mostly. First: the gate’s weight. A 16-foot steel driveway gate puts far more load on hinges and posts than a 4-foot garden gate, and that load shows up in the repair. Second: access. If the gate is set into a stone pillar or a tight corner, the technician spends more time working around the structure. Third: part availability. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we keep common parts on the truck. But a discontinued control board or an oddball actuator sometimes has to be ordered, which adds cost and a couple of days to the timeline.
What Affects Gate Repair Pricing in San Antonio
San Antonio is not one market. The soil, the neighborhoods, and the age of the housing stock all change what a gate repair costs. Here are the factors that move the price on a given job:
- Soil movement and post shifting. San Antonio sits on expansive clay. When the clay swells after rain and contracts during drought, gate posts lean. A post that has shifted an inch or two can often be stabilized without replacing it. A post that has shifted four inches usually needs new concrete, which is a $300 to $650 job depending on post size.
- Gate material and weight. Ornamental iron gates are common in Alamo Heights and Terrell Hills, and they’re heavy. Welding repairs on iron pickets run $150 to $400 per repair point. Wooden gates, more common in older neighborhoods like Monte Vista and Jefferson, often fail at the hinge screws or the frame corners instead.
- Electric vs. manual operation. An electric gate adds an opener, sensors, a control board, and a keypad or remote receiver. Any one of those failing brings a service call. Electric gate repair in San Antonio runs $250 to $900+ because the part alone often costs $150 to $400 before labor.
- Brand of equipment. We work on Mighty Mule openers that cost $300 to replace and DoorKing commercial controllers that cost $700+. The brand dictates whether we can repair the component on-site or need a factory replacement part.
- Age and condition of the existing hardware. Gates installed in the 1990s and early 2000s are hitting end-of-life on their original hinges, wheels, and opener boards. If the post is sound and the gate is worth saving, a targeted repair makes sense. If the frame is rusting through at the welds, a repair may be throwing money at a gate that needs replacement.
- City permitting for driveway gates on some properties. San Antonio generally does not require a permit for replacing an existing gate or repairing one in place, but new driveway gates in some subdivisions and historic districts may be subject to HOA review or city setback rules. We’ll flag that before any work begins so there are no surprises.
Common Gate Problems and What They Cost in San Antonio
Most gate repairs fall into a handful of recurring problems. Here’s what each one typically costs in the San Antonio market, with enough detail that you can spot what’s happening before you call.
Sagging Gate: $195 to $385
A gate that drags on the driveway usually means one of three things: stretched hinge screws, a failed hinge pin, or a post that has leaned out of plumb. In neighborhoods like Stone Oak and Cibolo Canyons, where gates are long and heavy, sagging is the single most common repair we see. The fix is usually a cable or turnbuckle kit that runs diagonally across the gate frame, plus Hinge & Post Repair where needed. On wood gates, we may need to rebuild the hinge-side corner of the frame. Expect $195 to $385 for a typical residential fix.
Gate Latch Not Catching: $165 to $240
When the latch won’t engage, it’s almost always a misalignment between the latch and the strike plate. Gate posts shift, hinges wear, and suddenly the latch sits a quarter inch too high or low. We adjust the hinges, shim the strike plate, or replace the latch assembly with a new one, including Lock Repair if needed. Most standard latch replacements in San Antonio run $165 to $240.
Electric Gate Opens but Won’t Close (or Vice Versa): $200 to $380
This is usually the photo eye sensors, not the opener motor. San Antonio’s dust, sun, and occasional heavy rain knock the sensors out of alignment or corrode the wiring over time. A sensor replacement or realignment typically runs $200 to $380. If it’s the control board instead, you’re looking at $350 to $750 depending on the brand.
Gate Opener Motor Running but Gate Not Moving: $300 to $750
When the motor hums but the gate stays put, the problem is usually the drive mechanism: a stripped gear, a chain that’s jumped, or a broken arm linkage. On LiftMaster and Linear swing-arm operators, the arm itself often fails at the connection point. Repairs run $300 to $600 for an arm replacement, and up to $750 if the internal gearing needs work.
Post Leaning or Loose: $300 to $650
This is the San Antonio soil problem made visible. When the clay swells and shrinks with our rain-drought cycles, gate posts gradually tip out of position. A lean of an inch or two can sometimes be corrected with a longer hinge or a post stabilizer. A bigger lean means digging out the old concrete, resetting the post, and pouring new. That’s a $300 to $650 job for a typical 4×4 or 6×6 post, more for a stone or brick column.
Weld Failure on Iron Gates: $150 to $400 per repair point
Ornamental iron gates in Terrell Hills, Olmos Park, and Alamo Heights often fail at the welds where pickets meet the frame. Heat, humidity, and the weight of the gate work the welds loose over decades. A mobile weld repair runs $150 to $400 per repair point, and most jobs involve two to four points.
Electric Gate Repair Costs in San Antonio
Electric gate repair deserves its own section because it’s a different animal. A manual gate is a mechanical object. An electric gate is a mechanical object with electronics bolted to it, and the electronics are what usually fail.
Here’s what we’re seeing across San Antonio in 2026 for electric gate work:
- Service call and diagnostic: $95 to $145. We come out, identify the fault, and put the exact number in writing before we touch anything.
- Remote or keypad programming: $85 to $150. Includes clearing old codes and setting up new remotes.
- Sensor replacement: $200 to $380. Covers the photo eye pair, wiring check, and alignment.
- Control board replacement: $350 to $750. DoorKing, Elite, Viking, and Linear boards live at the top of this range. Mighty Mule and Ghost Controls boards usually run lower.
- Opener arm or actuator replacement: $300 to $600. Common on LiftMaster and FAAC swing-arm systems.
- Full operator replacement: $1,200 to $2,800. New motor, arm, control board, remotes, and a full safety sensor calibration.
One thing worth knowing: many electric gate failures are misdiagnosed as motor failures when the real culprit is dirty sensors, a bad capacitor, or a wiring splice that’s gone green with corrosion. We test the whole system before quoting a replacement, because replacing a $400 board when a $10 capacitor is the problem is not how we work. We lay down drop cloths and put on shoe covers before we step inside your garage or control room, and we walk you through what we found and what it’ll cost to fix before doing anything else.
How to Save on Gate Repair
The biggest gate-repair cost is deferring a small problem until it becomes a big one. Here’s how San Antonio homeowners keep gate repair costs down:
- Call when the gate first starts behaving differently. A gate that drags slightly today will wear out its hinges in six months. A $200 hinge replacement now beats a $650 post reset later.
- Lubricate hinges and latch points twice a year. San Antonio’s heat and dust dry out hinge grease fast. A light machine oil or white lithium grease on hinges and the latch mechanism keeps things moving, and we choose pet-safe lubricants where there’s a choice so your yard stays safe for dogs and kids.
- Check the operator battery and remotes before calling for service. If the gate only works from the keypad but not the remote, you might just need a $10 battery, not a $300 service call. We’ll happily walk you through that check on the phone.
- Ask for a written quote before work starts. You should know the exact number before a single tool comes out. We write the price down and hand it to you, every visit, no pressure to accept.
- Consider the age of the equipment. A 20-year-old opener with a failed board and a worn arm might make more sense to replace than to repair in two stages. We’ll give you both numbers and let you decide.
If you’re anywhere in the San Antonio area and want a straight number, call Gate Repair Near Me in San Antonio, TX at (325) 252-5195. Estimates are free, and a live person answers the phone 24/7. We’ll give you a written price before any work begins, whether it’s a $165 latch replacement or a full electric opener swap.
Why Latch and Post Gate Repair San Antonio
Gate repair is all we do. We’re part of the Cedarwell family of independently owned and operated gate specialists, and we’ve been doing this since 2009. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, whether it’s a garden gate in Monte Vista or a 20-foot electric driveway gate in Stone Oak.
Our technicians are background-checked and uniformed, and they’re factory-trained on the brands families actually own here in San Antonio: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That training means the right fix usually happens on the first visit, not the third.
We also hold ourselves to a standard most gate companies never mention. The Cedarwell C.A.R.E. values are the routine on every job: we Clean up like it’s our own home, we Ask before we move or touch anything, we Respect your family’s time and quiet hours, and we Explain the price before the work. In practice, that means shoe covers and drop cloths on every visit, and a photo of the clean-up before our technician leaves. If your kids are napping, we bring the quieter tools. If your dog is in the yard, we’ll work around them or let you know when it’s safer to move them.
And every repair, every installation, is covered by the 365-Day Done Right Promise. If the work isn’t right, Latch and Post makes it right. No argument, no fine print.
FAQs – Gate Repair Cost
How much does gate repair cost in San Antonio?
Most gate repairs in San Antonio run between $165 and $485, with electric gate repairs typically falling between $250 and $900+. A simple latch replacement is usually $165 to $240, while a full electric opener replacement can reach $1,200 to $2,800. Call (325) 252-5195 for an exact quote: estimates are free and the price is in writing before we start.
Is it cheaper to repair or replace a gate?
It’s cheaper to repair a gate when the frame, posts, and hinges are still structurally sound. If the post is solid and the gate frame isn’t rusting through, a $200 to $400 repair beats a $1,800 to $5,500 replacement. If the post has shifted badly or the frame is failing at multiple welds, replacement often makes more sense: two or three repair rounds can cost more than one new gate. We’ll give you both numbers in writing and let you decide.
How much does it cost to fix an electric gate in San Antonio?
Electric gate repairs in San Antonio generally run $250 to $900+. Sensor replacements cost $200 to $380, control boards run $350 to $750, opener arms run $300 to $600, and a full operator replacement costs $1,200 to $2,800. Call (325) 252-5195 and we’ll diagnose the problem and quote the exact number.
Can you come out the same day?
Yes. We run service calls across San Antonio six days a week, and our phone is answered by a live person 24/7. If we can’t get a technician out the same day, we’ll tell you exactly when we can, and we’ll give you a written quote as soon as we’re on site. Call (325) 252-5195 and ask.
How much does a gate opener replacement cost?
A full gate opener replacement in San Antonio runs $1,200 to $2,800 including the new motor, arm, control board, remotes, and safety sensor calibration. The brand matters: Mighty Mule and Ghost Controls systems usually sit lower in that range, while LiftMaster, FAAC, DoorKing, Viking, and Elite systems run higher depending on the model. Call (325) 252-5195 for a written quote on your specific opener.
Do you charge for estimates?
No. Estimates are free. We come out, diagnose the problem, and hand you a written price before any work begins. If you decide not to go ahead, that’s completely fine: there’s no service fee pressure, and you’ll still have a clear picture of what the repair would cost. Call (325) 252-5195 to schedule.
Gate Repair Costs by San Antonio Neighborhood
San Antonio’s neighborhoods differ in gate styles, lot sizes, and soil types, and those differences show up in repair pricing. Here’s what we see where:
- Stone Oak and Cibolo Canyons: Long driveway gates, many electric, often LiftMaster or DoorKing openers. Expect $300 to $900 for most electric repairs. Soil here is rocky in places, which can make post work slightly more involved.
- Alamo Heights and Terrell Hills: Ornamental iron gates, many original to homes built in the 1930s through 1960s. Weld repairs and hinge replacements dominate, running $150 to $400 per repair point.
- Monte Vista and Olmos Park: Historic wood and iron gates. Wood frame corner repairs are common, and posts in the older clay soil often need stabilization. Typical jobs run $200 to $500.
- Helotes and the far northwest side: Larger lots, more ranch-style gated entries. Mighty Mule and Ghost Controls operators are common. Electric repairs usually run $250 to $700.
- Southtown and King William: Tight lots, often sidewalk-adjacent pedestrian gates. Post anchoring and latch work are the main jobs, running $165 to $350.
How the Latch & Post Process Works
Here’s what to expect when you call Latch and Post Gate Repair San Antonio:
- Call (325) 252-5195. A live person answers, day or night. No voicemail, no callback queue. Tell us what the gate is doing (or not doing), and we’ll schedule a visit.
- We arrive and assess. Our technician inspects the gate, the posts, the hinges, and the operator if it’s electric. We diagnose the problem and walk you through what we found in plain language.
- Written price, before any work. You get the exact number in writing. No pressure, no surprise charges. You decide whether to proceed.
- We do the work. Shoe covers on, drop cloths down if we’re inside or working near finished surfaces. We use pet-safe lubricants where there’s a choice, and we’ll keep the noise down if kids are asleep.
- Cleanup photo before we leave. We show you the clean-up, not just tell you about it. The gate works, the area looks like we found it, and your floors are clean.
- 365-Day Done Right Promise. If anything we fixed isn’t right within a year, we come back and make it right. That’s the whole promise.
For a free estimate on gate repair in San Antonio, call (325) 252-5195. We’ll give you a straight answer, a written price, and a repair that’s done right the first time.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Antonio, serving the San Antonio area since 2009.
Pricing reflects the San Antonio market as of 2026. Latch and Post Gate Repair San Antonio offers free estimates, call (325) 252-5195.
What Our Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"Good repair on a sagging gate. Part for the older motor took a few days, so two trips, but they explained it and were tidy and polite each time. Gate works smoothly now."
- Carmen Ulloa"Nice work on a sagging gate and a new hinge. The part took a few days so it was two trips, but they explained it and were tidy and polite each time."
- Marco Tillman