Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Kirby, TX
When a gate stops closing in Kirby, the fix usually comes down to the latch, the post, or the operator, and around here the work tends to have a particular shape. Kirby’s older ranch-style homes sit on generous lots, which means many automatic driveway gates were retrofitted onto fences that started life as chain-link or simple wooden runs. That reality changes how we approach nearly every job in this city, and it is why we always send a technician who has seen post lean, operator strain, and rusted hinge plates before. Call Latch & Post Gate Repair at (325) 252-5195 and you will reach a live person, any hour, any day.
Why Kirby Homes Are Different
Kirby’s housing stock is mostly single-family homes built between the 1950s and the 1980s. A lot of those properties still have their original chain-link or basic wooden fencing, and when a homeowner decides to upgrade to ornamental iron or aluminum, the gate rarely bolts on cleanly. Established landscaping crowds the driveway edges, many driveways are narrower than what newer subdivisions get, and the ground has shifted enough over four or five decades that posts are rarely plumb anymore. That means a gate installation in Kirby is almost always a retrofit: we adapt new hardware to existing posts, shim and brace where needed, and build the swing geometry around the yard as it actually is, not as a blueprint says it should be.
The climate has its own say. Kirby’s humid summers and hard downpours push moisture into metal hinges and wooden gate frames alike. Rust starts at the hinge plate and the latch bolt, wood warps at the top corner away from the hinges, and automatic operators begin fighting misalignment they were never sized for. We see the same story repeat across older Kirby neighborhoods: a manually operated swing gate gets an opener bolted on years after install, and a few seasons of soil shifting later the operator is laboring against a post that has drifted. Seasonal maintenance is common here, and it is usually cheaper than the repair that follows neglect.
Styles & brands we work with
Our Main Kirby Services
The two calls we get most in Kirby are for latch and hinge failures on older gates and for electric openers that have started struggling against warped frames or leaning posts. Each service has its own Kirby page with full pricing and detail.
Gate Repair in Kirby
Gate repair here usually begins with a hinge inspection, because on a 40-year-old fence the hinge screws have often wallowed out their holes and the gate has dropped. We re-lag hinges, replace rusted latch hardware, re-square frames, and adjust the swing so the gate closes without dragging across the driveway. In Kirby, we also check for soil settling under the post footing, which is a common reason a gate that worked fine in February stops latching in September. Every visit includes a written price before work starts. Full detail on Gate Repair in Kirby.
Gate Installation in Kirby
New gate work in Kirby usually means replacing a chain-link or plywood gate with ornamental iron or aluminum, and the existing posts rarely get reused as-is. We check the post footings, pour or re-set as needed, and then hang the new gate to match the driveway’s slope and the fence line’s quirks. Many Kirby driveways were poured decades ago with a crown in the middle, so gate clearance has to be measured at both ends, not just the latch side. Written quote first, every time. Full detail on Gate Installation in Kirby.
Electric Gate Repair in Kirby
When an automatic opener in Kirby stops responding, the problem is often not the motor, it is the gate it is trying to move. Older swing gates that were never designed for automation put constant strain on the arm, the control board, and the safety edges. We check the operator’s force settings against the gate’s actual resistance, inspect wiring runs that may have been exposed to Texas sun for years, and replace failed capacitors, boards, or arms. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Full detail on Electric Gate Repair in Kirby.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kirby
Kirby homes carry a mix of opener brands, and we keep factory-trained familiarity across the main ones: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Common parts for Linear and DoorKing units stay stocked on our trucks, which means fewer return trips. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Kirby, TX
| Service | Typical range in Kirby |
|---|---|
| Gate latch replacement | $180 – $340 |
| Gate hinge replacement (pair) | $220 – $400 |
| Gate post re-setting or concrete repair | $300 – $650 |
| Gate alignment and adjustment | $150 – $280 |
| Basic gate repair service call | $95 – $180 |
| Standard gate installation (single swing) | $1,200 – $2,800 |
| Custom ornamental iron gate | $2,500 – $6,500 |
| Automatic opener installation | $1,800 – $4,500 |
| Control board replacement | $350 – $750 |
| Safety sensor or edge replacement | $200 – $450 |
In Kirby, prices can push toward the higher end when the existing posts have shifted and need re-setting before new hardware can hang, or when the old fence line has been buried under years of landscaping that has to be worked around. Whatever the number, you get it in writing before any work begins, and the price we quote is the price you pay.
Neighborhoods We Serve in Kirby
We cover all of Kirby, including the older streets where 1960s ranch homes sit on large lots and the newer pockets that have filled in over the years. Typical response for gate work in Kirby is same-day or next-morning, depending on parts.
- Kirby city center and old town streets
- Residential streets south of Gibbs Sprawl Road
- Neighborhoods around Ackerman Road
- Lots backing up to Salado Creek
- Filled-in blocks along FM 78 and Old Seguin Road
Service Area – Cities Near Kirby
Latch & Post Gate Repair works throughout Kirby and the surrounding area. Dispatch and scheduling are coordinated from the brand’s San Antonio office, and crews serve Kirby locally. Nearby, we also do gate work in San Antonio, TX, New Braunfels, TX, Boerne, TX, and Alamo Heights, TX.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kirby
Most Kirby gate repairs are scheduled same-day or next-morning, and our live phone line takes calls around the clock. Parts for common operators like LiftMaster and DoorKing are usually on the truck, which keeps most first visits to a single trip. Call (325) 252-5195 to check today’s schedule.
Permit requirements in Kirby depend on the scope of work and whether new concrete or electrical is involved. Most straightforward gate replacements on existing posts do not require anything, but we will tell you what applies before work starts. We handle the paperwork when a permit is needed.
Yes. Our technicians are background-checked, uniformed, and trained under Cedarwell C.A.R.E. values. We put on shoe covers and lay drop cloths before stepping inside, we choose pet-safe lubricants where there is a choice, and we can schedule around nap time or school runs if quiet matters. Tell us what works and we will plan around it.
If your gate is sagging, refusing to close, or wearing out its opener, call Latch & Post Gate Repair at (325) 252-5195. A live person answers, and the estimate is free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kirby Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Careful and considerate from start to finish. Our kids were playing in the yard and the crew was mindful of them the whole time. Gate opens like new and the area was spotless after."
- Marcus Teague