Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Kirby
Electric gate repair in Kirby usually means one of two situations: a swing gate that won’t open at all, or a gate that grinds, sags, and trips the safety sensors every time it moves. Most repairs we handle on Kirby’s older ranch-style properties run between $225 and $480, and the exact number lands in writing before we touch a single bolt. If your gate is stuck or acting up, call (325) 252-5195 and a live person answers, day or night.
We know Kirby’s lots. Long driveways off Ackerman Road, aging post footings on Binz-Engleman, heavy gates on Abbott Road near the old feed store. These aren’t fresh suburban installs with clean conduit runs and level ground. They’re retrofit jobs, and they need a technician who’s seen how expansive clay soil moves a hinge post out of plumb over thirty years. Our Electric Gate Repair crews work these entrances weekly, and we bring the parts that match what’s actually bolted to your fence, not whatever is on sale this month.
Why Latch and Post Gate Repair San Antonio Is Kirby’s Preferred Electric Gate Repair Company
Most of our Kirby work comes from neighbors telling neighbors, because a gate that opens quietly at 6 a.m. is something people notice and talk about. We’ve repaired operators on homes along FM 78, on streets off Gibbs Sprawl, and on the larger acreage properties east of town where the entrance is a quarter mile from the house. The common thread is old posts, heavy gates, and openers that were never sized for the job.
Kirby wasn’t built as a gated community. The homes went in between the 1950s and 1980s, mostly manual gates, chain-link, cedar posts. When automation got cheaper, a lot of homeowners added openers to gates that were never designed to swing under motor power. That’s our bread and butter. We reinforce the post, rehang the gate, and program the opener so it stops fighting the hinge.
Our technicians show up in uniform, background-checked, and factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Before any work starts, you get a written price. If it’s done right, the gate stays right. If it isn’t, the 365-Day Done Right Promise means we return and fix it, no argument.
Styles & brands we work with
Gate Access Control in Kirby
Gate access control in Kirby is the difference between a gate that opens for anyone with a remote and a gate that opens only for the people you want on your property. On larger lots and acreage entrances, that distinction matters more than in a tight subdivision. We install and repair keypads, telephone entry systems, vehicle sensors, and card readers, and we wire them into the operator so they work the first time.
Keypad Entry Systems
Kirby’s heat and humidity are hard on outdoor keypads. The membrane buttons on older DoorKing and Linear units crack after a few summers, and once moisture gets inside the board, codes stop registering. We stock replacement keypads locally and can usually have one installed the same day we diagnose it. If the keypad still works but the gate ignores it, the problem is often the control board, not the keypad itself.
Vehicle Detection and Safety Loops
On wide farm gates and retrofit swing gates, a poorly placed vehicle loop or a dirty safety photocell is the single most common reason a gate reverses for no reason. We cut in new saw-cut loops, adjust photocell alignment, and test the entrapment protection to current standards. This is safety equipment, not an add-on. A heavy gate that closes on a car or a child is a real risk, so we treat loop and sensor work as a priority repair, not an upgrade.
Commercial Gate Operator in Kirby
Commercial gate operators in Kirby do more work per day than a residential opener does in a month. A slide gate at a storage facility off FM 78 or a cantilever gate at a light industrial yard cycles hundreds of times daily, and the operator has to hold up to heat, dust, and drivers who hit the gate. We service heavy-duty openers from DoorKing, Elite, and LiftMaster, including chain-drive and rack-and-pinion slide systems.
Heavy-Duty Slide Gate Operators
Slide gates on Kirby commercial properties are often retrofitted onto chain-link or tube steel frames that were hand-operated for years. The added weight and daily cycling stress the motor, the rack, and the end stops. When a slide gate starts grinding or jumping the rack, we inspect the drive chain tension, the roller brackets, and the limit switches before replacing anything. Replacing a motor on a misaligned rack just burns up another motor.
Solar-Powered Operators for Remote Entrances
On rural acreage entrances around Kirby where running conduit isn’t practical, a solar gate operator is often the right answer. The catch is dust. Pollen and field dust coat the panels, voltage drops, and the gate moves slow or not at all after a few cloudy days. We size the panel and battery to the actual gate weight and daily cycles, and we clean and test solar arrays as part of routine operator service. Most solar opener calls we see are not failed equipment. They’re underfed batteries.
Trusted Brands We Service in Kirby
We’re factory-trained on the brands Kirby homeowners and business owners actually have bolted to their fences. LiftMaster operators show up on a lot of retrofit residential jobs because they’re sold at every big-box store. Mighty Mule and Ghost Controls are common on solar and DIY installs. DoorKing and Elite dominate commercial and heavy residential entrances. We keep common control boards, limit switches, remotes, and keypads in local stock so a Kirby repair doesn’t stall out waiting on a part from a distributor across the state. Parts aside, experience with the brand means we diagnose the problem correctly instead of throwing parts at it.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Kirby Homes
- Post lean and hinge bind after rain. Kirby sits on expansive clay, and when it rains heavy, the soil swells and pushes hinge posts out of plumb. A swing gate that bound up after a storm has usually leaned its post, and the operator is now fighting the hinge instead of turning it.
- Sagging retrofit gates on old footings. Many Kirby homes added automatic openers to manual gates that were set on shallow footings never designed for motor-driven weight. The gate sags, the rack and pinion strip, and the opener faults out.
- Dust-choked solar panels on long driveways. On acreage entrances where solar is the only power source, Kirby’s dry spells coat panels with fine dust. Low voltage leads to intermittent operation and dead batteries that get blamed on the opener.
- Keypads failing in heat and humidity. Summer in Kirby is rough on outdoor electronics. Cracked keypad membranes let moisture into the board, and suddenly the code that worked all spring does nothing in August.
Pricing for Electric Gate Repair in Kirby, TX
What we quote on one Kirby gate is not what we quote on another, because the gates are not the same. Here’s a straight sense of what our Kirby customers actually pay. A keypad replacement runs $140 to $260. A safety sensor or photocell repair is $120 to $220. Control board replacement runs $280 to $520, depending on the brand. Gate motor replacement runs $380 to $750, more for a commercial slide operator. Full post excavation and re-setting with new concrete starts around $400 and goes up from there based on gate size and access. Every quote is written and handed to you before work starts. Call (325) 252-5195 and we’ll come look at it for free.
We Also Serve Cities Near Kirby
Our Electric Gate Repair in Kirby service area extends into San Antonio, New Braunfels, Boerne, and Alamo Heights. If your property sits on the edge of Kirby or a few miles out, call us. We’ll tell you honestly whether it’s in our regular service ring, and we’ll schedule the work at a time that makes sense for you.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Kirby
The post is leaning. Kirby’s soil is expansive clay, and when it soaks up water it swells and pushes your hinge post out of alignment. The gate then hangs heavy on the hinge side, the opener strains, and the safety sensors trip. The fix is digging out the post, setting a deeper concrete footing with rebar, and rehanging the gate before reprogramming the opener limits. We do this work on Kirby properties regularly. Call (325) 252-5195 and we’ll check the post lean before recommending any motor work.
Yes, and we do it often on Kirby acreage entrances where running conduit would cost thousands. The important part is sizing the panel and battery to the gate’s weight and daily cycles, not just bolting on a kit. We also account for Kirby’s dust, which coats panels and slowly kills batteries if nobody cleans them. A properly sized solar system with a decent battery bank will run a swing gate year-round, with a panel cleaning at service time.
The first step is a hinge and post assessment. If the original post footings were poured for a light manual gate, the added motor torque and weight eventually shift them. Sometimes the fix is weld-on hinge reinforcement and rebalancing the gate. Other times the post has to come out and be re-set on a deeper footing. The motor itself is rarely the root cause. We inspect and quote the mechanical repair first, then verify the opener is sized correctly for the load. Price is always in writing before we start.
Wide gates on uneven terrain need an operator sized for the gate’s true weight and swing arc, not its posted dimensions. A 16-foot tube steel gate with a slight downhill grade loads the opener more than a flat 16-footer. We often spec a linear actuator or a heavy-duty piston arm rather than a light residential operator, and we set the hinge side so the gate doesn’t run away downhill. Where the ground is uneven, we may need a custom hinge post or a wheel support to carry the weight. It’s tedious work, but it’s the difference between a gate that works for a decade and one that eats an opener every two years.
Yes. Kirby summers crack keypad membranes and let moisture reach the circuit board, which is the usual reason a keypad goes dead between June and September. We replace the keypad unit, or the board if the keypad is still mechanically fine, and we use a sealed, weather-rated case for the new install. It’s a $140 to $260 fix in most cases, and we’ll have it quoted before we remove a single screw. Call (325) 252-5195 for a free estimate.
On Abbott Road near the old Kirby feed store, we serviced a 16-foot tube steel swing gate that had sagged badly after heavy spring rains. The original hinge post had leaned forward over two inches, straining a LiftMaster LA400 operator and tripping the safety photocell. We excavated the post, set a new concrete footing with rebar, and reinforced the hinge with a heavy-duty weld-on bracket before rehanging the gate and reprogramming the operator limits. The owner can now open the gate with the keypad entry without the motor grinding.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Antonio, serving Kirby since 2009.