Gate Installation in Boerne - Written Price, Install Date Set

Fast, Reliable Gate Installation Across Boerne

Gate installation in Boerne usually means one of two jobs: fitting a custom ornamental steel or wood gate on a multi-acre Hill Country lot, or replacing a worn-out opener on an existing limestone-posted driveway gate. A standard single swing gate installation in Boerne runs $2,800 – $6,500, while a long-span custom ornamental gate with automation typically falls between $7,000 and $18,000 depending on span, material, and how much limestone ledge the crew hits when setting posts. We know this range well because Boerne’s terrain, not the gate itself, often drives the final number. Call (325) 252-5195 for a written price before any work begins.

Call (325) 252-5195

Why Latch and Post Gate Repair San Antonio Is Boerne’s Preferred Gate Installation Company

The difference shows up in the small things on Boerne jobs. Our technicians keep extra shims and epoxy anchors on the truck because a third of the posts they encounter are set directly into limestone ledge rather than poured concrete. That’s not a detail a general handyman thinks about until the auger stops at 14 inches and the gate still needs to hang plumb on a rolling drive off Ranger Creek Road.

Boerne homeowners tend to ask the same questions before they book: Will the crew leave the driveway clean? Will the gate actually clear the slope? Will the price change once the post hole hits rock? Our answers are the same every time. We lay drop cloths and wear shoe covers if we step inside, we measure the grade before recommending a swing versus slide configuration, and the written price you approve is the price you pay. The 365-Day Done Right Promise covers every installation. If it isn’t right, we make it right.

Every call to Latch & Post Gate Repair is answered by a live person, 24 hours a day. You won’t get a voicemail queue when you’re standing at the end of your driveway wondering whether the gate will clear the culvert. You’ll get a real answer, usually from someone who knows Boerne’s neighborhoods well enough to ask the right follow-up questions.

Gate Opener Installation in Boerne

Gate opener installation in Boerne usually pairs a heavy custom gate with the patience to align everything so the motor isn’t fighting the terrain. Boerne’s long driveway gates tend to be heavy ornamental steel or composite wood mounted on posts set into rocky soil. When the operator has to strain against a post that’s drifted a half inch out of plumb, the board burns out in three years instead of fifteen. That’s why opener work here starts with checking the posts, not the motor. A typical gate opener installation in Boerne runs $1,400 – $3,800, including mounting, wiring, safety edges, and programming, plus the written price before we touch anything.

Underground Operators for Long-Span Gates

On multi-acre Boerne lots where an above-ground arm operator would look wrong next to a custom ornamental gate, we install underground operators from FAAC, BFT, and Linear. These sit inside a sealed vault below the hinge side of the gate, which keeps the look clean and protects the motor from flash flood runoff that crosses some Boerne driveways. The tradeoff is that the vault excavation and drainage matter more than the motor itself, especially where limestone ledge forces a shallow footing.

Solar-Ready Opener Systems for Remote Lots

Boerne has plenty of gates too far from the house for a cost-effective power run. For those, we size a solar-ready opener with battery backup and a low-draw swing arm or linear operator. We’ll tell you honestly whether your gate’s weight and daily cycle count make solar practical. Some custom ornamental gates are simply too heavy for a 10-watt panel on a cloudy Hill Country winter week. When solar works, we wire it, mount the panel to avoid afternoon shade from the oaks, and test the battery through a full open-close cycle before we leave.

Gate Fabrication in Boerne

Gate fabrication in Boerne means building the gate to fit the terrain, not ordering something off a shelf and hoping the posts sit square. Custom work here tends to involve long spans (14 to 18 feet or more), ornamental steel with curved or arched top rails to match Hill Country aesthetics, and mounting points that account for grade changes at the driveway apron. A custom fabricated single ornamental gate in Boerne typically runs $4,000 – $9,000 before automation; oversized double or slider gates with matching pedestrian access run $9,000 – $18,000 installed. Every fabrication job starts with a site measurement, not a brochure.

Ornamental Steel and Heavy Wood Over Stone Posts

Many Boerne homes near the old town are historic limestone construction, and the driveway posts are often stone or steel set decades ago. We fabricate gates that respect that look: matte black steel with forged accents, or heavy cedar and steel frames that sit naturally against limestone. We’ll also tell you when a beautiful old stone post isn’t structurally sound enough to carry a new 400-pound gate without a steel core. That conversation is part of what you’re paying for.

Matched Pedestrian Gates and Entry Hardware

A double driveway gate without a matched pedestrian gate creates a footpath straight through the landscaping. On most Boerne custom properties we fabricate both, sharing the same top rail profile, picket spacing, and finish so the pedestrian gate reads as part of the entry, not an afterthought. We also coordinate the entry hardware: keypad placement, intercom mounting height, and camera sightlines before the gate steel is cut, so nobody has to drill into a fresh powder coat later.

Trusted Brands We Service in Boerne

Our technicians are factory-trained on the brands Boerne families actually own, including Viking, Ghost Controls, and DoorKing. We carry common Viking and Ghost Controls boards, remotes, and safety edge components on the truck, plus DoorKing loop detector parts for slide gate applications. That means a service call to a Boerne property usually gets the exact part installed the same day rather than waiting a week for a distributor shipment. Anything we don’t stock locally, we source and schedule quickly.

Common Gate Installation Problems We See in Boerne Homes

• Post lean on long-span swing gates. Boerne’s limestone soil shrinks and swells with wet-dry cycles, slowly pushing posts out of plumb on rolling lots. A gate that’s an inch out of alignment at the hinge means the opener motor is working against that weight every single cycle.
• Thermal binding on rack and pinion slide gates. Boerne’s humid summers cause ornamental steel to expand and warp. When a heavy gate grows a half inch in the heat, the rack binds against the pinion and the operator trips its force setting.
• Eroded post footings after flash floods. Runoff crossing a Boerne driveway can wash soil from around post footings set in rocky ground, leaving a slide gate out of level. Then the loop detector starts misreading vehicle presence because the gate isn’t sitting where the system expects it.
• Limestone ledge stopping a post hole 14 inches down. A third of Boerne posts hit rock before the auger reaches proper depth. Without epoxy anchors and shimming, the contractor either cuts the post short or pours a shallow footing that can’t carry the gate’s cantilevered weight.

Pricing for Gate Installation in Boerne, TX

We Also Serve Cities Near Boerne

From our Boerne work, we regularly serve nearby communities including San Antonio, Converse, and New Braunfels. If you’re outside Boerne proper but still in the Hill Country, give us a call and we’ll tell you straight whether our Gate Installation team can reach you this week. Many of our Boerne customers have found us through neighbors in those areas.

FAQs About Gate Installation in Boerne