Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in San Antonio?
Gate repair in San Antonio typically costs between $175 and $650 for most common fixes, with the majority of homeowners paying around $280 to $420. Simple repairs like latch replacement or sensor realignment sit at the lower end, while electric gate board replacement or welded post work pushes toward the higher end. You’ll see your exact number in writing before any work starts, because that’s how a repair should work.
At Latch and Post Gate Repair San Antonio, we focus on the two things every gate depends on: the latch that holds it and the post that carries it. That focus keeps our pricing tight and our work precise.
Gate Repair Cost Breakdown (2026)
Here’s what San Antonio homeowners can expect to pay for common gate repairs in 2026. These ranges reflect what we see across neighborhoods like Alamo Heights, Stone Oak, Terrell Hills, and Helotes, and they cover both parts and labor.
| Repair Type | Typical Cost Range | What It Includes |
|---|---|---|
| Gate latch replacement | $145 – $260 | New latch, alignment, and adjustment |
| Hinge replacement (pair) | $180 – $340 | Heavy-duty hinges, welded or bolted |
| Sagging gate correction | $160 – $300 | Frame reinforcement, hinge realignment |
| Electric gate opener repair | $225 – $480 | Motor diagnostics, limit switch, arm adjustment |
| Control board replacement | $350 – $650 | New board, programming, testing |
| Sensor or safety eye realignment | $120 – $220 | Cleaning, alignment, obstruction check |
| Welded post repair | $300 – $750 | Post straightening, welding, concrete reset if needed |
| Full gate replacement (single driveway) | $1,200 – $4,500 | Custom or standard gate, hardware, installation |
What moves a price up or down in San Antonio? The biggest driver is whether the gate is electric or manual. Electric gates carry more components: the opener arm, the control board, safety sensors, and sometimes a keypad or intercom. A manual gate with a worn latch is almost always the least expensive fix. Material matters too. Wrought iron, ornamental steel, and cedar each require different tools and time. A welded repair on a steel post in Stone Oak will cost more than a hinge swap on a cedar gate in Oak Hills, simply because welding takes longer and demands more setup.
Age plays a role. Older gates, especially those installed before 2010, often have discontinued opener parts. If you own a LiftMaster or FAAC unit from the mid-2000s, we may need to retrofit a compatible current board or arm, which adds $80 to $150 to the parts line. We’ll tell you that before we order anything.
And here’s a San Antonio-specific factor: soil movement. Our clay-heavy soil expands and contracts through wet-dry cycles, which slowly pulls gate posts out of plumb. We regularly see gate posts in Alamo Heights and Monte Vista shift a quarter inch or more after a long dry spell followed by heavy rain. That’s why post work is common here, and why we always check post integrity even when the call is about something else.
What Affects Gate Repair Pricing in San Antonio
- Gate type and weight. A 14-foot ornamental iron driveway gate weighs hundreds of pounds. A 4-foot cedar garden gate doesn’t. Weight changes the hinge, the opener requirements, and the labor. Your price reflects the real load, not a generic line item.
- Electric vs. manual. Electric gate systems have boards, sensors, remote receivers, and safety edges. Each part has a known replacement cost. Manual gates rarely exceed the cost of the hardware and the time to align it properly.
- Brand of opener. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Parts availability varies by brand. DoorKing and Viking boards tend to run higher than Mighty Mule or Ghost Controls, simply because of the component cost from the manufacturer.
- Access and clearance. Gates in tight side yards or backed by concrete slabs take more time to work around. We account for that honestly in the written quote, rather than padding hours.
- Post condition. If the post is rusted through at the base or wobbling in loose soil, the latch or hinge repair won’t hold. We’ll tell you if the post needs work, and what that adds, before we proceed. No surprises after the fact.
- Time of service. A live person answers our calls 24/7, and we do respond to after-hours and weekend calls. Standard business hours keep the rate at the lower end of the range. Late-night or holiday visits affect pricing, and we’ll state that clearly up front.
What You’ll Pay for Common Gate Problems in San Antonio
Let’s get specific about what families actually call us about for gate repair near me in San Antonio, TX. These are the top service calls we run across San Antonio, from Cibolo to Leon Valley, and what they typically cost in 2026.
Gate Won’t Latch: $145 – $260
The most common call by far. A gate that won’t stay closed is usually a latch alignment issue or a worn strike plate. We replace the latch, align the gate, and test it with the gate’s full weight against it. You’ll get a written price for the complete job before we start. Cedarwell-family technicians always explain the price before the work, and you decide if you want to proceed. No pressure.
Gate Sagging or Dragging: $160 – $300
San Antonio’s heat and clay soil take a toll on wooden gates especially. The gate droops, the latch no longer lines up, and the bottom edge scrapes. We correct the sag by reinforcing the frame and adjusting the hinges, or replacing them if they’re beyond adjustment. In neighborhoods like Terrell Hills and Olmos Park, where mature trees drop heavy shade and humidity, we see this issue more often than in newer construction areas like Alamo Ranch.
Electric Gate Opener Not Responding: $225 – $480
When the opener won’t budge, the cause is usually one of three things: a failed control board, a burned capacitor, or a misaligned safety sensor. We diagnose the exact fault, show you the failed part, and give you the repair cost before we touch a thing. If you own a LiftMaster or FAAC opener, factory-trained diagnosis means we’re not guessing on your dime.
Gate Post Loose or Leaning: $300 – $750
This is the San Antonio clay soil issue in action. A leaning post means the gate’s entire geometry is off, which puts stress on the latch, hinges, and opener. We straighten and re-set the post, often adding concrete depth beyond the original install. It’s a more involved repair, and it’s one of the few where we’ll recommend planning a full day. But once it’s done properly, it holds through the next decade of Texas weather cycles.
Remote or Keypad Not Working: $95 – $190
Sometimes it’s a dead battery, sometimes the receiver lost its programming. We test the remote signal, reprogram it, and replace the unit if it’s failed. This is one of the least expensive electric gate fixes, and it’s usually resolved on the first visit.
How to Save on Gate Repair
Saving money doesn’t mean waiting until the gate fully fails. In fact, ignoring a small issue is the most expensive path, because a misaligned latch will eventually ruin the hinges, and a dragging gate will wreck the post’s footing. Here’s what actually saves San Antonio homeowners money:
- Address small issues early. A latch that’s slightly sticky might be a $145 fix today. In six months, the same problem can turn into a hinge replacement and post repair at $500 or more.
- Keep the gate track and hinges clean. Dust from San Antonio’s dry summers and debris from oak trees clog hinges and sensor lenses. A quick rinse with a garden hose every couple of months helps. For electric gates, keep the safety sensor lenses free of dust and spider webs.
- Get a written quote before approving work. That’s not a money-saving hack we’ve dreamed up for this page. It’s genuinely how we work. You see the exact number, in writing, before any repair begins. If you don’t like the number, you’re not obligated to move forward.
- Bundle small fixes. If you’re having us out for a latch issue and you know the gate’s been dragging a bit, tell us. We’ll quote both at once, which saves you the cost of a second trip.
- Ask about brand-specific parts. Some openers have compatible aftermarket sensors or receivers that work fine and cost less than OEM parts. We’ll tell you if that’s an option for your LiftMaster, FAAC, or Mighty Mule unit. If OEM is the better long-term call, we’ll tell you that too, and why.
Call (325) 252-5195 for a free estimate. There’s no obligation and no charge for the quote, and a live person answers the phone every time you call, day or night.
Why San Antonio Homeowners Choose Latch and Post Gate Repair
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. Latch and Post Gate Repair San Antonio has been operating since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. Cody Beckman leads our team, and the standard he sets is what every technician follows.
Here’s what that looks like on a service call. We arrive in uniform. We lay drop cloths on the floor and put on shoe covers before we step inside, even for a quick keypad programming. We ask before we move or touch anything. We explain the price before the work. We clean up like it’s our own home, and we take a photo of the clean-up before we leave so you can see exactly what we saw when we walked out your door. If your kids are napping, we’ll work with quiet tools or schedule around nap time. If you have pets, we’ll choose pet-safe lubricants where there’s a choice.
This routine comes from the Cedarwell C.A.R.E. values, and they’re not optional in our book. Clean up like it’s our own home. Ask before we move anything. Respect your time and quiet hours. Explain the price before the work. Every single visit.
And then there’s the promise that backs everything. Our 365-Day Done Right Promise means that if the repair isn’t right, we make it right. No argument, no fine print, no clawback. If a hinge we installed comes loose or a board we programmed acts up within a year, we return and fix it. That’s the whole guarantee.
What to Check Before You Call
If your gate is acting up, a few quick checks can save you time and help you describe the problem accurately. These are safe, simple observations. For anything involving the opener’s power supply or the gate’s structural components, please don’t try to fix it yourself. High-tension springs and heavy steel gates deserve a trained technician.
- Check the latch alignment. Close the gate slowly and watch where the latch meets the strike plate. If it’s off by more than a quarter inch, the gate has likely sagged or the post has shifted. Note which direction the misalignment runs.
- Look at the hinges. Rust, loose screws, or a visible gap at the hinge point all point to hinge wear. If the gate wobbles when you lift it slightly, the hinges are likely the culprit.
- Test the remote. For electric gates, try the remote from close range. If it only works from a few feet away, the remote battery may be weak or the receiver antenna may be damaged. If it doesn’t work at all, the issue may be at the opener.
- Inspect the safety sensors. Check the small lenses on either side of the gate opening. If they’re dusty, covered in spider webs, or misaligned, the opener may refuse to close as a safety precaution. This is a common cause of “the gate won’t shut” calls.
- Check the power. Confirm that the opener is plugged in and the breaker hasn’t tripped. Look for a small light on the control board. If it’s dark, the issue could be power-related rather than mechanical.
- Write down the brand and model. The more information you have, the faster we can diagnose and quote. Check the label on the opener arm or the control box. Knowing whether you have a LiftMaster, FAAC, BFT, or Mighty Mule unit helps us bring the right parts on the first visit.
Electric Gate Repair: What It Costs to Get It Working Again
Electric gates account for about half of our repair calls in San Antonio. They’re more complex than manual gates, which means more variables in the pricing. But every electric gate has a predictable set of components, and each one has a known fix.
The most common electric gate failures we see are the control board, the opener arm, and the safety sensors. A control board replacement runs $350 to $650, depending on the brand. An opener arm replacement, when the motor itself has burned out, runs $500 to $900 for most residential systems. Safety sensor realignment is the least expensive fix at $120 to $220, and it’s often all that’s needed.
If you have a Ghost Controls or Mighty Mule opener, parts are generally more accessible and less expensive than a Viking or DoorKing equivalent. That doesn’t mean one brand is better or worse; it’s simply the reality of parts pricing. We factory-train on all of them, so the diagnosis is accurate regardless of what’s mounted on your post.
One thing to know before any electric gate work begins: these systems carry significant voltage. A control board replacement or arm service isn’t a DIY job. We use proper testing procedures and disconnect power before opening any panel. If you’re handy around the house, you might be tempted to open the control box and probe around. We’d rather you didn’t. High-current wires and capacitors hold a charge even after the breaker is off. Call us instead.
Gate Installation: What a New Gate Costs in San Antonio
Sometimes a repair is possible, and sometimes the better financial decision is replacement. Here’s the honest math. If a gate is rusted through in multiple places, or the frame is cracked, or the post footings have failed completely, the repair cost can approach 70 to 80 percent of the cost of a new gate. At that point, we’ll tell you replacement may be the smarter long-term investment.
A new gate installation in San Antonio generally runs:
- Single driveway gate (steel or iron): $1,800 – $3,500 installed
- Double driveway gate (steel or iron): $3,500 – $7,000 installed
- Pedestrian or garden gate (wood or steel): $500 – $1,800 installed
- Electric opener addition to an existing gate: $1,400 – $3,000 installed, depending on the opener brand and automation features
Every installation includes the same Cedarwell Care Promise routine: written price up front, shoe covers and drop cloths inside, a cleanup photo before we leave, and the 365-Day Done Right Promise behind the work.
FAQs – Gate Repair Cost
How much does gate repair cost in San Antonio?
Most gate repairs in San Antonio cost between $175 and $650, with an average around $300 to $420. A latch replacement starts at $145, hinge replacement at $180, and electric gate opener repair at $225. Call (325) 252-5195 for a free written estimate on your gate.
Is it cheaper to repair or replace a gate?
If the repair cost is under about $700 and the gate’s frame and posts are sound, repair is almost always the cheaper option. If the frame is compromised or post footings have failed, replacement may make more sense, since repeated patch repairs can exceed the cost of a new gate within a couple of years. We’ll give you the honest comparison, in writing, before any work begins.
How much does it cost to fix an electric gate opener?
Electric gate opener repair in San Antonio typically costs between $225 and $480, depending on whether the issue is a sensor, a capacitor, or a board. A complete control board replacement runs $350 to $650, while a full opener arm replacement can run $500 to $900. Call (325) 252-5195 for an exact quote on your opener brand.
Can you come out the same day for gate repair in San Antonio?
In most cases, yes. A live person answers our calls 24/7, and we schedule same-day visits whenever our route allows. If you’re dealing with a security issue, like a gate that won’t close at all, call (325) 252-5195 and we’ll do our best to get a technician to you that day.
Do you charge for estimates?
No. Estimates are free, and you’ll receive your price in writing before any work begins. If you decide not to proceed, there’s no charge for the visit and no pressure to commit. That’s part of how we operate, on every job, for every home.
What gate opener brands do you repair?
We repair and install LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers. Our technicians are factory-trained on these brands, so the right diagnosis happens on the first visit.
Call Latch and Post Gate Repair San Antonio
If your gate is sagging, won’t latch, or the opener has stopped responding, call us. We’ll answer with a live person, every time, day or night. We’ll schedule a visit that works for you. We’ll show up in uniform, explain exactly what’s wrong and what it costs in writing, and we’ll treat your home the way we’d treat our own. Floors stay clean. Kids stay undisturbed. You get a straight number before any work starts.
Call (325) 252-5195 for a free estimate on gate repair in San Antonio. Cody Beckman and the Latch and Post team are ready when your gate needs us.
Pricing reflects the San Antonio market as of 2026. Latch and Post Gate Repair San Antonio offers free estimates – call (325) 252-5195.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Antonio, serving San Antonio since 2009.
What Our Customers Say
"Nice work on a sagging gate and a new hinge. The part took a few days so it was two trips, but they explained it and were tidy and polite each time."
- Marco Tillman"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs