Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Terrell Hills
Gate repair in Terrell Hills usually means one of two things: a heavy iron gate that no longer swings true, or an operator that quit responding. We fix both, and we do it against a backdrop most crews never account for – the expansive clay soil under this city that slowly pushes posts out of plumb. If your gate is dragging, binding, or refusing to close, call (325) 252-5195. We answer around the clock, and we’ll give you a written price before any work begins.
Latch and Post Gate Repair is a Cedarwell-family gate specialist, not a general handyman. We focus exclusively on Gate Repair, gate installation, and electric gate repair. Every visit includes shoe covers, drop cloths where the job touches your home, and a cleanup photo before we leave. That’s the routine Cody Beckman set when he built this business, and it hasn’t changed since 2009.
Why Latch and Post Gate Repair San Antonio Is Terrell Hills’s Preferred Gate Repair Company
Terrell Hills homeowners tend to know their houses. Many of these homes were built between the 1930s and 1960s, and the gates that came with them were custom ironwork – often heavier than anything sold off the shelf today. When one of those gates starts to sag, the right fix requires more than a wrench. It requires someone who can read why it’s sagging. Our crews work Terrell Hills regularly, coordinated from the San Antonio office, and we’re familiar with the streets off North New Braunfels, the estates near the Terrell Hills municipal complex, and the long driveways along Eldon and Wiltshire. That local familiarity means faster diagnosis when we arrive.
We don’t ask you to trust us on faith. You’ll get a written price before we touch anything. You’ll see shoe covers go on at the door. You’ll get a photo of the cleanup when the job is done. And if the repair isn’t right, the 365-Day Done Right Promise means we make it right – no argument, no fine print. That’s the difference between someone who fixes gates and someone who cares how the job lands at your house.
Styles & brands we work with
Commercial Gate Repair in Terrell Hills
Commercial Gate Repair in Terrell Hills usually involves estate-scale driveway entrances rather than retail storefronts. These are large, ornamental swing gates, often with operators that were installed when the home was built and have since drifted out of alignment or failed outright. We regularly service the big custom gates along the deep lots east of Broadway and the gated driveways that define the neighborhood’s quieter streets. The work often starts with post footings – in this soil, a cast-in-place footing can shift enough over decades to bind a gate that’s otherwise in decent shape.
Heavy Swing Gate Re-Leveling
When a commercial-scale gate drags or won’t latch, the cause is usually a hinge post that’s leaned out of square. We set new concrete footings where needed, then re-hang and re-true the gate. Most footing-level work in Terrell Hills runs $600 – $1,400 depending on post size and access.
Estate Operator Retrofit
If the operator works but the gate doesn’t move freely, the gate itself is the problem. We see this constantly: an old Viking or DoorKing opener straining against a gate that’s shifted on clay. Re-leveling the gate often extends the operator’s life by years. A full operator retrofit, including new arms, control board, and safety edges, typically runs $1,800 – $3,400 in Terrell Hills.
Iron Gate Repair in Terrell Hills
Iron Gate Repair in Terrell Hills is the core of what we do. The city’s older estates are full of custom wrought-iron and steel gates – beautiful pieces that were built before galvanization and powder coating were standard. South Texas humidity works on them for decades, and rust forms at the weld points first. The gate gets heavier as it corrodes, and that added weight puts more strain on posts and hinges. We repair those gates in place whenever possible, preserving the original ironwork rather than replacing it.
Hinge Replacement and Strap Fabrication
When a hinge strap breaks or a pintle wears through, we fabricate a match for the original. That’s true metalwork, not a hardware-store substitute. Most hinge repairs around Terrell Hills run $250 – $650 per hinge assembly, depending on the size and weight of the gate leaf.
Weld Repair and Corrosion Treatment
Rusted-through pickets at the bottom rail are common here – especially where landscape irrigation keeps the ground wet. We cut out the bad section, weld in a replacement that matches the original profile, then treat the treat the repaired area and repaint. Weld repairs in Terrell Hills typically run $180 – $450 per section, plus rust treatment if the whole gate needs it.
Trusted Brands We Service in Terrell Hills
Our technicians are factory-trained on the brands most common in Terrell Hills driveways: Viking, Ghost Controls, DoorKing, and Elite, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We stock common control boards, remotes, and safety parts locally, so a repair is often same-visit rather than waiting on a parts order. If your operator is an older Viking or DoorKing model, we almost always have the replacement board on the truck or can source it same-day from local distributors. That’s a real advantage when you’re dealing with a 20-year-old board that’s no longer in production.
Common Gate Repair Problems We See in Terrell Hills Homes
- Hinge-post lean from expansive clay. The soil under Terrell Hills swells when wet and contracts when dry. Over decades, that movement tilts even well-set post footings. A leaning post binds the gate and burns out operators – most callouts start with a re-level of the post footing.
- Obsolete control boards. We see a lot of operators installed in the 1990s and early 2000s. When a control board finally goes, the manufacturer often stopped making it years ago. We can usually retrofit with a current board and adapters rather than replace the entire operator – but if the motor itself is tired, replacement is the cheaper long-term answer.
- Rust at weld points. Humidity and decades of exposure work on unprotected iron. Weld joints rust first because the heat-baked finish above them flakes over time. We cut out and re-weld the bad section, then treat and paint to match.
- Gate dragging after rain. When clay soil saturates, it expands and lifts shallow footings slightly. A gate that dragged during a dry spell may suddenly scrape the ground after a heavy rain. That’s a soil issue, not a gate issue – the fix is a deeper footing and proper drainage around the post base.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Terrell Hills, TX
Most gate repairs in Terrell Hills fall into predictable ranges, and you’ll see your exact number in writing before we start. A standard hinge replacement or gate re-alignment runs $250 – $700. Post re-setting with a new concrete footing runs $600 – $1,400 depending on post size and how much of the old footing has to be removed. Weld and rust repair runs $180 – $450 per section. Full operator replacement, including a new arm, control board, receiver, and safety edges, runs $1,800 – $3,400. The biggest variable in Terrell Hills is the weight and age of the gate itself – a 1960s wrought-iron gate takes more care to re-hang than a modern aluminum one. Call (325) 252-5195 for a free estimate.
We quote the job before we do it. Every time. The written price is the price you pay, whether the job takes one hour or four. That’s the Cedarwell Care Promise, and it’s non-negotiable in our company.
We Also Serve Cities Near Terrell Hills
Our crews cover Terrell Hills and the surrounding area, including San Antonio, New Braunfels, Boerne, and Alamo Heights. If you’re in one of those cities and need Gate Repair in Terrell Hills or your own neighborhood, the same crew standards apply. We schedule and dispatch from the San Antonio office, so a truck is never far from Terrell Hills when you need one.
Serving Terrell Hills, TX - Our Local Coverage Area
We’re based in the Terrell Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Terrell Hills
Yes, in most cases. The ornamental iron gates built into Terrell Hills homes in the 1940s and 1950s are usually worth preserving. We re-hang them on new footings, fabricate matching hinge straps where the old ones have worn through, and re-weld rusted joints rather than replacing the whole panel. Replacement only comes up when the metal itself is too thin from decades of rust to weld safely. Even then, we can often rebuild the bottom rail and salvage the ornate sections. Call (325) 252-5195 and we’ll tell you honestly which path makes sense for your gate.
The most likely cause is that the clay soil expanded and shifted a hinge post or the gate leaf itself just enough to trip the operator’s safety force setting. The operator senses resistance, assumes something is blocking the gate, and refuses to close. The fix is usually a post re-level or a hinge adjustment – not a new operator. If the gate has shifted far enough to bind repeatedly, we’ll recommend setting new footings at a depth that resists soil movement. Call (325) 252-5195 and we’ll diagnose it directly, usually by the next day.
Yes, but the gate has to be hung square and moving freely first. A heavy manual gate that’s been dragging on clay-shifted posts is not ready for an opener. We’d start by re-setting the hinge post footing and re-hanging the gate, then select an opener rated for the gate’s weight. A heavy iron gate usually needs a linear arm operator from Viking, DoorKing, or Ghost Controls, plus safety photocells and an edge sensor. Installed, that’s typically $2,400 – $4,200 in Terrell Hills depending on the gate’s size and how much post work is required. Call (325) 252-5195 for a written quote.
Not necessarily. When a control board is obsolete, we can often retrofit a current board that’s compatible with the existing motor and arm. That’s a $500 – $900 repair on most older Viking, DoorKing, and Elite operators. But if the motor is also tired – meaning it runs hot, stalls, or struggles to move the gate – then a full operator replacement is the cheaper and more dependable answer. We’ll tell you which one your situation calls for, and the price is always written down before we start. Call (325) 252-5195 for an honest assessment.
Yes. Any automatic gate installed or substantially modified today must meet UL 325 safety standards, which require photocells and, on most gates, contact edge sensors that reverse the gate if it hits someone or something. Older gates in Terrell Hills that predate those standards are often missing them. When we retrofit an operator or repair a gate, we add the safety devices so the gate is code-compliant and safe for kids and pets. It’s standard on every job we do, not an add-on line item. Call (325) 252-5195 and we’ll walk you through what your gate needs.
One Gate Story from the Field
On a quiet street off North New Braunfels, our crew re-trued a 1960s wrought-iron swing gate whose hinge post had tilted nearly four inches out of plumb due to clay soil. The gate still looked beautiful, but it hadn’t latched properly in years. We set a new concrete post footing, fabricated a matching hinge strap to preserve the original ironwork, and added a safety photocell and keypad entry to bring the manual gate up to modern standards. The homeowners kept their original gate – heavier and better built than anything they could order today – and it now closes with a push. That’s the kind of repair we do more than any other in Terrell Hills: stabilize the soil-driven problem, preserve the original work, and modernize where safety or convenience calls for it.
If you have a gate that’s leaning, dragging, or refusing to open in Terrell Hills, call (325) 252-5195 today. You’ll get a live person, a straight answer, and a written estimate. We’ll protect your floors, name the price before we begin, and show you the cleanup when we’re done.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Antonio.