Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Terrell Hills, TX
Gate work in Terrell Hills leans heavily on precision repair rather than quick replacement. Many of the homes here, custom built from the mid-20th century or earlier, still have their original wrought-iron or steel driveway gates. Those gates are heavy, often non-standard, and they sit on expansive clay soil that shifts with every wet and dry season. That means our crews routinely square up settled posts, rebuild vintage latch assemblies, and match new fabrication to old ironwork. If your gate is binding, sagging, or refusing to close, call us at (325) 252-5195 and we’ll send someone who knows the difference between a Terrell Hills original and a modern off-the-shelf panel.
Why Terrell Hills Homes Are Different
Terrell Hills isn’t a tract-home neighborhood. The lots are large, the streets are quiet, and the homes were built when ornamental ironwork was standard at the driveway entrance. That ironwork is now 50 to 80 years old in many cases, and South Texas humidity has had that long to work on it. We regularly see rust inside the bottom rails of manual swing gates, hinges that have worn into ovals, and posts that have tilted a few degrees out of plumb because the clay underneath them swelled and shrank. A gate that drags on the concrete or won’t latch cleanly usually isn’t one problem. It’s a post that’s moved, a hinge that’s sagged, and a latch that’s been forced too many times. Repairing a Terrell Hills gate means correcting all three at once, then protecting the metal so the cycle doesn’t repeat in two summers.
The climate here accelerates a few specific failures. Hot, humid air gets inside cracked paint and starts rust you can’t see from the street. The rare winter freezes push moisture deeper into hairline cracks, and the expansion can pop old welds. Intense sun also degrades the plastic housings and wiring on automatic openers, even on the manual gates many Terrell Hills homeowners prefer to keep original. We respect that preference. Most of the time, replacing an old latch or fabricating a matching picket is entirely possible, and we’d rather do that than sell you a new gate you don’t want.
Styles & brands we work with
Our Main Terrell Hills Services
Most of our work in Terrell Hills falls into two categories: bringing aging manual gates back to square, and upgrading or repairing the automated openers on the properties that have them. A third service, full gate installation, is for homeowners who’ve decided the original gate has reached the end of its structural life and want a new one built to match the house.
Gate Repair in Terrell Hills
This is the service Terrell Hills calls for most often, and it’s where the expansive clay soil shows up first. A gate that was hung perfectly level twenty years ago can now bind against the latch post because the ground beneath that post has shifted. We reset posts, rebuild or replace hinges, straighten bent frames, and service vintage latches that aren’t manufactured anymore. When a matching part doesn’t exist, we fabricate it. The goal is to keep your original ornamental ironwork on the house, not to swap it for something generic. For the full breakdown of what our repair visits include here, see Gate Repair in Terrell Hills.
Gate Installation in Terrell Hills
When a Terrell Hills gate is rusted through at the bottom rail or the frame has cracked beyond repair, installation is the honest answer. We build new gates to suit the house, whether that’s a reproduction of the original ornamental design or a cleaner modern steel panel. We also set new posts in concrete and let them cure correctly before hanging anything on them, which matters in soil that moves as much as Terrell Hills clay does. Every installation includes a written price before work starts. For more on how we approach new gates here, see Gate Installation in Terrell Hills.
Electric Gate Repair in Terrell Hills
Automatic openers in Terrell Hills usually fail in one of two ways: plastic components that have baked in the sun, or motors that have been straining against a gate that no longer swings freely. We service the brands most common on these properties, including LiftMaster and Viking operators, and we always check the gate itself before we blame the motor. An opener that keeps tripping its limit switch is often fighting a post that’s shifted. For a full look at what we diagnose and fix on automated systems here, see Electric Gate Repair in Terrell Hills.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Terrell Hills
We repair and maintain openers from Viking, Ghost Controls, DoorKing, and Elite, among others. Our technicians stock common control boards, sensors, and remote receivers for these brands, and most parts arrive within a day or two when something unusual is needed. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Terrell Hills, TX
| Service | Typical range in Terrell Hills |
|---|---|
| Gate latch replacement | $140 – $260 |
| Hinge replacement (per hinge) | $80 – $160 |
| Post reset or straightening | $350 – $800 |
| Sagging gate frame correction | $200 – $450 |
| Rust repair and repainting (gate section) | $300 – $700 |
| Wood gate panel replacement | $350 – $750 |
| Custom ironwork fabrication (per picket or section) | $90 – $220 |
| Electric opener diagnostics | $95 – $150 |
| Opener motor replacement | $450 – $950 |
| Opener arm or bracket replacement | $180 – $380 |
| Sensor or safety edge replacement | $150 – $320 |
| Full gate installation (manual swing, standard steel) | $1,800 – $5,500 |
In Terrell Hills, prices trend toward the upper end of these ranges when the gate is oversized, the posts have settled badly enough to require excavation, or custom fabrication is needed to match original ironwork. Whatever the job, you’ll get a written price before any work begins, and that number is what you pay. No surprise line items added after the fact.
Neighborhoods We Serve in Terrell Hills
We work throughout Terrell Hills, from the larger estate properties to the quieter interior streets. Most of our Terrell Hills calls are handled same day or next morning, depending on when you reach us.
- Terrell Hills estates
- Harry Wurzbach Road area
- Wiltshire Avenue corridor
- Eldorado Avenue area
- North New Braunfels Avenue area
Service Area – Cities Near Terrell Hills
Our Terrell Hills crews also cover the surrounding communities across the northeast side of the metro. We regularly work in Alamo Heights, just across the boundary, and in San Antonio proper. We also serve families further out in New Braunfels and Boerne.
Serving Terrell Hills, TX - Our Local Coverage Area
We’re based in the Terrell Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Terrell Hills
We come to Terrell Hills. Dispatch and scheduling run from our San Antonio office, but the technicians who work on your gate serve Terrell Hills directly. You’ll get a local crew, a written price before work starts, and a live person on the phone when you call, day or night.
Repairs to an existing gate on your property generally don’t require HOA approval, but a full replacement or a change in gate design often does. Terrell Hills has active deed restrictions and an architectural review process. We’d rather you check first than face a retrofit, and we’re happy to provide the details your HOA asks for. Call (325) 252-5195 and we can talk through it.
Yes. Custom fabrication is a standard part of what we do here, not an exception. When a picket is rusted through or a latch has failed, we replicate the original profile in a local fabrication shop and finish it to match. Our goal is preserving the character of the house, not replacing it with a catalog part.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Terrell Hills Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Careful and considerate from start to finish. Our kids were playing in the yard and the crew was mindful of them the whole time. Gate opens like new and the area was spotless after."
- Marcus Teague