Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in San Antonio, TX
Automatic gate repair in San Antonio usually means one of three things: the gate won’t open, the gate won’t close all the way, or the gate opens and closes on its own. Most of the time we can fix the problem the same day we arrive, and the repair typically runs between $150 and $400 depending on what failed. If your gate operator is acting up in Alamo Heights, Stone Oak, or anywhere else in the San Antonio area, call Latch and Post Gate Repair San Antonio at (325) 252-5195 and we’ll walk you through what you’re seeing before we even schedule the visit.
We’re a Gate Repair in San Antonio specialist under the Cedarwell family, and automatic openers are a big part of what we see. The heat, the rain, and the occasional freeze-thaw cycle here do a number on circuit boards, limit switches, and gearboxes. A gate that works fine in January will sometimes refuse to budge in July because the capacitor finally gave out in the heat. That’s not your fault. It’s just what San Antonio weather does to outdoor electronics over time.
When You Need Automatic Gate Repair
Here are the calls we get most often from San Antonio homeowners. If any of these sound familiar, you don’t need to diagnose it yourself. The list just helps you describe what’s happening when you call.
- The gate hums but doesn’t move. This usually points to a capacitor or a stripped gear inside the operator. On Ghost Controls and Viking units we see this after a few hard summers, especially if the gate is heavy and the opener has been working near its weight limit for years.
- The gate opens but stops halfway. A limit switch or obstruction sensor is often the culprit. In neighborhoods like Terrell Hills where lots have mature live oaks, acorns and leaf litter can block a photo eye and confuse the operator into thinking something is in the way.
- The gate reverses direction before closing. This is a safety feature behaving badly. The current sensor or close-force setting thinks there’s an obstruction. It could be a hinge dragging, a wheel off its track, or a sensor that needs recalibration.
- The remote works sometimes but not others. Intermittent remote trouble in San Antonio often traces back to a failing receiver board or a low battery in the remote itself. If your neighbor’s gate opener on the same frequency starts interfering, we can switch yours to a different code.
- The gate opens on its own at random. We see this after a power surge or a lightning strike nearby. A damaged control board can short and trigger a phantom open command. DoorKing boards are particularly sensitive to surges, so we check them first when a customer describes this symptom.
- The gate is stuck open or stuck closed. When a gate won’t move at all, we work backward from the simplest cause: power to the outlet, breaker condition, then the operator itself. On Elite and Viking slide gates, a jammed chain or a bent rail will stop everything dead.
Our Automatic Gate Repair Process
Every Gate Repair services visit follows the same routine, and we tell you the price before we touch a single component. Cody Beckman set this process up years ago because he got tired of hearing stories about vague estimates and surprise charges.
- Call and talk to a person. You call (325) 252-5195 and a live person answers, day or night. We ask what the gate is doing, what brand the operator is, and whether it’s a slide or swing gate. That helps us bring the right parts on the first trip.
- On-site diagnosis with a written price. The technician checks the operator, the safety sensors, the remote receiver, and the gate’s mechanical motion. Before any repair begins, you get a written price for what’s actually wrong. No pressure. If you’d rather get a second opinion, that’s your call.
- Repair with the parts we brought. Because we’re factory-trained on Ghost Controls, DoorKing, Elite, and Viking systems, most common failures are fixed on the first visit. We carry the boards, gears, capacitors, and remote receivers those brands use most.
- Testing and adjustment. We run the gate through a full open and close cycle several times, then adjust the force settings and limit positions so the gate isn’t working harder than it has to. A properly adjusted automatic gate uses less power and lasts longer.
- Cleanup and a photo. Before we leave, we sweep up any debris from the work area, and if we had to step inside to reset a breaker or check a control panel, we put on shoe covers and lay down drop cloths. You get a photo of the cleaned up work area before we go. Every job, every time.
- 365-Day Done Right Promise. If the repair isn’t right, we make it right. That’s the whole promise. No argument, no fine print, no deductible. If it acts up again within a year because of something we fixed, call us.
Automatic Gate Repair Pricing in San Antonio
Most How Much Does Gate Repair Cost? (2026 Price Guide) - San Antonio, TX situations fall between $150 and $400. The range is wide because the parts inside these operators range from a $20 capacitor to a $200 control board, and labor varies depending on whether we’re working on a swing gate near the house or a slide gate with a long rail run.
- Remote replacement or programming: $45 to $80, depending on the brand and whether we’re adding a new remote or reprogramming an existing one.
- Capacitor replacement: $150 to $220. This is the most common heat-related failure we see on Ghost Controls and Viking operators.
- Limit switch adjustment or replacement: $180 to $300. Requires opening the operator housing and testing the gate’s travel distance several times.
- Control board replacement: $250 to $400. DoorKing and Elite boards cost more than some others, and this repair usually includes reprogramming your existing remotes.
- Gear or drive replacement: $200 to $380. Worn teeth on the drive gear cause that humming-but-not-moving problem.
- Full operator replacement: $900 to $2,200, installed. This is when the existing operator is beyond repair or the cost to fix it exceeds about 60% of a new unit. We give you the number straight and let you decide.
What affects the price? The gate’s weight and length matter more than most people realize. A heavy wrought iron driveway gate puts more strain on the operator than a light aluminum pedestrian gate. A slide gate with a long rail requires more adjustment time. And if the issue is intermittent, it can take longer to isolate than a hard failure. You’ll see the exact number in writing before any work starts, and the estimate is free. Call (325) 252-5195 for an exact quote on your specific operator.
FAQs – Automatic Gate Repair
How much does automatic gate repair cost in San Antonio?
Most automatic gate repairs in San Antonio run between $150 and $400, depending on the part that failed and whether you have a swing or slide gate. Common repairs like capacitor replacement fall on the lower end, while control board replacement sits on the higher end. You’ll get a written price before any work begins, and the estimate is free. Call (325) 252-5195 for an exact quote on your operator.
Can you fix my automatic gate the same day?
In most cases, yes. We stock the most common parts for Ghost Controls, DoorKing, Elite, and Viking operators on our trucks, so first-visit repairs are the norm rather than the exception. If you describe the symptom when you call, we’ll bring the likely part with us. Call (325) 252-5195 and tell us what’s happening and we’ll give you a straight answer on timing.
Is it cheaper to repair or replace my automatic gate operator?
A good rule is that if the repair cost is under 60% of a new installed operator, repairing usually makes sense. When the operator is 10 to 15 years old and the control board and drive gear both need replacing, replacement can be the better long-term value. We’ll give you both numbers in writing and let you choose. No pressure.
Why does my gate open by itself at night?
Phantom openings are usually caused by a damaged control board, a stuck remote button somewhere, or interference from a nearby device on the same frequency. In San Antonio, we also see this after thunderstorms when a power surge has partially fried the receiver circuit, which may require Gate Realignment work. We can diagnose the cause with a receiver test and a board inspection.
Why San Antonio Homeowners Call Latch and Post
Automatic gate repair is one of those jobs where the difference between a good outcome and an expensive repeat visit comes down to how careful the technician is. Every gate comes down to two physical parts: the latch that holds it and the post that carries it. The opener attached to either one has to work in harmony with both. That’s the job we focus on every day, and it’s why we’re called Latch and Post.
Our technicians are background-checked and uniformed, and they work to the Cedarwell C.A.R.E. values: clean up like it’s our own home, ask before we move or touch anything, respect the family’s time and quiet hours, and explain the price before the work. If you have kids napping, we can work with quiet tools and adjust our schedule around the house. If you have pets, we choose pet-safe lubricants when there’s a choice. We lay drop cloths on the floor and put on shoe covers before we step inside your home. Your floors stay clean. The photo of the cleanup before we leave is our proof that we did what we said.
If your automatic gate is acting up, start with a phone call. A live person answers 24 hours a day, 7 days a week. We’ll ask a few questions, give you a sense of what the repair might cost, and set a time that works for your family. Reach us at (325) 252-5195.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Antonio, serving San Antonio.