Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Terrell Hills
Gate Installation in Terrell Hills runs $2,400 – $11,000 for most residential projects, depending on the gate’s size, material, and whether automation is included. A standard 12-foot ornamental steel swing gate with manual hardware typically lands between $3,200 and $5,600 installed. For custom 16-foot driveway gates with operators, intercom entry, and underground loop detectors, expect $7,500 – $11,000. We’re the Gate Installation team at Latch and Post Gate Repair San Antonio, and we serve Terrell Hills homeowners who want a gate that matches the street, opens quietly, and stays square for years. Our crews know the expansive clay under your lots and the heavy ornamental ironwork on your driveways. Call (325) 252-5195 for a written, no-pressure quote.
Key takeaways:
- Most Terrell Hills gate installations cost $2,400 – $11,000, with automatic driveway gates on the upper end.
- Our footings are sized for expansive clay, not generic specs, so posts don’t sink or tilt after a wet-dry cycle.
- Every quote is written down before work starts. No deposit games, no surprise line items.
- Shoe covers and drop cloths are standard on every visit, plus a cleanup photo before we leave.
Why Latch and Post Gate Repair San Antonio Is Terrell Hills’s Preferred Gate Installation Company
We’ve been part of the Cedarwell family of independently owned and operated gate specialists since 2009. That means our Terrell Hills work follows one routine: a written price before we touch anything, shoe covers and drop cloths inside your home, quiet tools when kids are napping, and a photo of the clean-up before the technician pulls out of the driveway. No exceptions.
Homeowners in Terrell Hills call us because our techs are factory-trained on the brands families actually own here: DoorKing, Viking, Ghost Controls, and Elite. When a 1970s ornamental iron gate needs a new hinge post or a matched operator, we’re not guessing. We’ve seen it, fabricated for it, and installed it on streets like Garraty, Eldon, and Ivy Lane. Cody Beckman leads our team and holds every installation to the 365-Day Done Right Promise: if it’s not right, we make it right, no argument, no fine print.
Styles & brands we work with
Automatic Gate Installation in Terrell Hills
Automatic Gate Installation in Terrell Hills usually means converting a heavy manual driveway gate or installing a new operator on a freshly built gate, and it runs $1,800 – $4,500 for the automation portion depending on operator type, safety sensors, and access control. Many Terrell Hills homes have oversized swing gates on large lots, and those need a high-torque operator with a reinforced hinge system, not a box-store opener meant for a ranch gate. We install DoorKing and Viking operators with photocell safety edges and loop detectors sized for your driveway’s slope and traffic pattern.
Retrofit Openers for Existing Gates
Your gate doesn’t have to come down to go automatic. We mount operators on the original post if it’s still structurally sound, hide conduit along the back rail, and route wiring so nothing interrupts the sightline from the street. The goal is automation you can’t see unless you look for it.
Underground Operators and Access Control
For Terrell Hills driveways with no room for a visible arm, we install underground operators. These need proper drainage, and that’s where local experience matters: runoff from sloped driveways collects in operator pits and shorts motors if the drain isn’t graded right. We bed the canister in clean gravel and run a dedicated drain line so a wet spring doesn’t kill your opener.
Gate Installation Services in Terrell Hills
Gate Installation Services in Terrell Hills cover driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. A new ornamental steel pedestrian gate with a matching post runs $2,400 – $4,200 installed. A double driveway gate, 14 to 20 feet across, with custom scrollwork and a paired operator system, typically lands between $8,000 and $11,000. We fabricate the steel to match your home’s existing ironwork rather than bolting on a catalog panel. The price you see on paper is the price you pay.
Pedestrian and Side Yard Gates
These go in around back-of-house access, pool enclosures, and garden entries. Most Terrell Hills properties have mature landscaping, so we hand-dig around root systems and set posts with concrete collars that shed water away from the steel. Height and handle placement follow your existing house trim, not a default diagram.
Driveway Swing and Double Gates
Heavy gates need posts that won’t lean. We set oversized footings, usually 36 to 42 inches deep, with rebar cages and hinge-post reinforcement as a default on Terrell Hills clay. The gate clears by a full inch today and still clears after the next dry summer pulls moisture out of the ground.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Terrell Hills
We’re factory-trained on DoorKing, Viking, Ghost Controls, and Elite. Terrell Hills homes tend to have DoorKing and Viking operators on automatic driveway gates, with Ghost Controls and Elite showing up on retrofit and custom work. Because we focus exclusively on gates, we can usually bring the right board, arm, or sensor on the first trip instead of ordering blind. That matters when a gate weights 800 pounds and the family’s only driveway entrance is blocked. We stock the common parts for these four brands, which keeps turnaround short for Terrell Hills customers.
Common Gate Installation Problems We See in Terrell Hills Homes
- Sagging panels that bind on the latch side. Expansive clay under Terrell Hills lots swells after rain and shrinks in dry heat, tilting hinge posts just enough to pull a gate out of square. The fix is a deeper, reinforced post, not a shim.
- Hidden internal rust in original scrollwork. South Texas humidity works inside the hollow sections of ornamental iron. The first hard freeze makes that trapped moisture expand and crack the welds. We weld in new steel before re-drilling, so the repair outlasts the paint.
- Underground operator failures from driveway runoff. Sloped Terrell Hills driveways send rainwater into the operator pit. If the pit doesn’t drain, the motor sits in water and shorts. Our installations bed the canister in gravel and add a drain line.
- Gate openers killed by sun exposure. Intense South Texas sun degrades plastic control boards and wiring insulation over time. We route wiring through conduit and mount control boxes on the shaded side of the post where the architecture allows it.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Terrell Hills, TX
Here’s what you can expect to budget in Terrell Hills:
| Gate Type | Typical Installed Cost |
|---|---|
| Pedestrian ornamental steel gate | $2,400 – $4,200 |
| 12-foot driveway swing gate, manual | $3,200 – $5,600 |
| Automatic operator retrofit on existing gate | $1,800 – $4,500 |
| 16-foot ornamental steel gate with operator | $7,500 – $11,000 |
| Double driveway gate with paired operators | $8,000 – $11,000 |
What moves the number? Gate width, weight, and whether we’re matching existing scrollwork. Automation adds the operator, safety sensors, loop detector, and access control panel. Terrell Hills lots often have long driveways, so conduit runs and wire pulls can add a few hundred dollars. We write the full number down before any work starts. That’s the quote. No upsells at the door. Call (325) 252-5195 for a free estimate.
We Also Serve Cities Near Terrell Hills
Our gate crews work throughout the Terrell Hills area every week. If you’re in Terrell Hills proper, or nearby in San Antonio, New Braunfels, Boerne, or Alamo Heights, we can schedule a measure and get you a written price. The same C.A.R.E. routine applies: shoe covers, drop cloths, cleanup photo, and a written price before the work. Dispatch and scheduling are coordinated from our San Antonio office.
Serving Terrell Hills, TX - Our Local Coverage Area
We’re based in the Terrell Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Terrell Hills
Because the original gates were hand-built, often in the 1950s and 1960s, with non-standard dimensions and scrollwork patterns that no catalog part matches. When the hinge side rusts or the post shifts, a factory panel won’t line up. We fabricate new hinge posts, splice in fresh steel where corrosion has thinned the scrolls, and match the original profile so the repair disappears. Call (325) 252-5195 and we’ll assess your gate in person.
We bury the posts deeper than code minimum and pour oversized footings with rebar cages, because Terrell Hills sits on expansive clay that swells and shrinks through wet-dry cycles. That’s the standard on every installation we do, not an add-on. The gate is set with clearance for seasonal movement. Call us for a written quote that spells out footing depth and post spec.
Yes. We mount the operator arm low and behind the gate rail, run conduit along the back edge, and keep the control box below sightline. No one sees the automation from the street. We can also match the operator’s arm color to the ironwork if the gate is visible from the curb. The original gate stays. The convenience changes. Call (325) 252-5195 to schedule a measure.
Yes, every automatic gate we install in Terrell Hills includes monitored safety photocells and an auto-reverse edge. That’s not optional gear. A 600-pound moving gate is a serious piece of equipment, and the sensors stop it before it can pinch a child, pet, or car. We also install loop detectors for vehicles and a manual release in case of power loss. Safety is wired in, not sold as an upgrade.
For a heavy ornamental gate in Terrell Hills that cycles 30 to 50 times a day, we recommend a high-duty DoorKing or Viking swing operator with a continuous-duty motor and a soft-start/soft-stop control board. These operators are built for steel gates weighing 600 pounds or more. The soft-start also reduces stress on the hinge welds, which matters on older ironwork. We’ll spec the exact model in your written quote.
Call Latch and Post Gate Repair San Antonio for Gate Installation in Terrell Hills
If you live in Terrell Hills and you’re thinking about a new gate or want to automate the one you have, call (325) 252-5195. We’ll schedule a measure, walk the site, and hand you a written price before anything gets ordered. Cody Beckman and our Terrell Hills crew will treat your driveway like it’s their own. Shoe covers on, drop cloths down, cleanup photo sent before we leave. And if it’s not right, the 365-Day Done Right Promise means we fix it. No argument, no fine print.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Antonio, serving Terrell Hills and surrounding communities since 2009.