Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for San Antonio Homeowners
A gate that drags, sags, or refuses to latch is more than an annoyance. It’s a daily frustration that gets worse every time the kids run through it or the wind catches it. Latch & Post Gate Repair has been fixing gates across San Antonio since 2009 as part of the Cedarwell family, and we specialize in one thing: gates. Driveway gates, pedestrian gates, sliding gates, welded frames, iron and wood. When you call (325) 252-5195, a live person answers. Not a recording, not a callback queue. The technician who arrives at your home in Alamo Heights or Terrell Hills wears a uniform, brings shoe covers and drop cloths, and shows you a written price before touching a single bolt.
Every repair we make is covered by the 365-Day Done Right Promise. If it isn’t right, we come back and make it right. No argument, no fine print. Our home page explains the Cedarwell standards we hold every job to.
Driveway Gate Repair
Driveway Gate Repair covers the full mechanism that opens and closes your vehicle gate: the track, wheels, opener arm, hinges, and the frame that holds everything square. In San Antonio, most driveway gate repairs fall between $180 and $650 depending on whether we’re replacing worn rollers, straightening a sagging post, or servicing the opener itself. You’ll see the exact number in writing before we start.
Common Driveway Failures We Fix
A gate post that has shifted half an inch in the clay soil will throw the entire gate out of level. We check the hinges and post base first, because that’s usually the root cause. Then we test the opener’s force settings so the gate isn’t straining against a bound wheel or a bent track.
When the Opener Is the Problem
If the gate moves halfway and reverses, or hums without moving, the issue is usually in the limit switch, the capacitor, or the drive gear. We’re factory-trained on Viking and Ghost Controls openers, and we carry common parts on the truck so most opener repairs happen on the first visit. We can also point you to our Gate Repair in New Braunfels page if you’re out that way.
Styles & brands we work with
Gate Welding
Gate Welding is the process of fusing metal components to restore a gate’s structural integrity, and it’s the right fix when a hinge tears loose, a picket cracks at the weld point, or a frame corner separates. Typical gate welding jobs in San Antonio run from $150 for a small crack repair to $900 for re-welding multiple failed joints on a large sliding gate. We quote every weld job after we see the damage up close.
Fixing a Torn Hinge or Cracked Frame
When a hinge weld fails, the gate drops and every other component starts wearing fast. We grind the old weld clean, re-align the hinge to the post, and weld it back with proper penetration so it holds under repeated daily cycles. Heating a gate frame to weld it is precise work, and we protect surrounding surfaces while we work.
After the Weld: Cooling and Finish
A weld needs time to cool before the gate moves again. We’ll tell you exactly when it’s safe to use, and we’ll touch up the repaired area so it doesn’t rust at the weld site. We see a lot of failed welds in neighborhoods like Timberwood Park where gates are older and have gone through years of San Antonio heat and rain cycles.
Commercial Gate Repair
Commercial Gate Repair addresses the heavier, high-cycle gates used at business entrances, apartment complexes, and industrial properties, and the work prioritizes reliability over appearance. Commercial gate repairs in San Antonio typically run from $350 to $2,400 depending on the gate size, the opener type, and how much structural repair is needed. We provide a written price and a realistic timeline before any work begins on a commercial property.
What Commercial Gates Need That Residential Ones Don’t
A commercial gate opens fifty times a day or more, which means components wear at a different rate. The operator, the safety edges, the loop detectors, and the wheel trucks all need to be matched to the gate’s weight and daily cycle count. We service DoorKing and Elite operators, two brands you see on commercial properties all over San Antonio and Leon Valley.
Minimizing Downtime
We understand a business can’t have its gate down for long. That’s why we diagnose first, then schedule the repair with the parts we need already in hand. If the gate is a safety concern and you need it fixed fast, call (325) 252-5195 and a live person will help you sort out the details. Our Gate Repair in Boerne page covers commercial work in that area as well.
Iron Gate Repair
Iron Gate Repair covers gates made from wrought or cast iron, and it’s usually about rust, corroded hardware, or broken decorative elements. Iron gate repair in San Antonio costs between $160 and $800 for most jobs, depending on whether we’re replacing hardware, treating rust, or welding broken scrollwork back into place. The quote is always written and always your call to accept.
Rust and Corrosion Treatment
San Antonio’s humidity and hard rain periods work on iron quickly, especially near sprinkler overspray. We wire-brush the affected areas, apply a rust converter where appropriate, then seal and paint to match. Catching rust early means a $160 repair instead of a $500 replacement down the road.
Hardware That’s Seen Better Days
Iron gates often hold up while the hinges, latches, and fasteners fail around them. We replace worn hardware with galvanized or stainless options so the new parts don’t start rusting before the rest of the gate does. If you’re in Castle Hills or Windcrest, we’re usually out within a day or two for non-emergency iron gate work.
Sliding Gate Repair
Sliding Gate Repair focuses on the roller trucks, track, guide wheels, and motor system that move a gate side to side instead of swinging it open. Sliding gate repairs in San Antonio range from $180 for a roller replacement to $1,200 for a full track realignment and motor service combined. Sliding gates are common on narrower driveways and in neighborhoods like Kirby and Live Oak where lot lines are tighter.
Track Problems and Roller Wear
A sliding gate that jerks or scrapes usually has a worn wheel or a track that’s shifted out of alignment. We level the track, check the truck bearings, and replace any wheel that shows flat spots. If the gate still binds, we look at the guide wheels and make sure the gate isn’t twisting as it travels.
Sliding Gate Motor Adjustments
The motor on a sliding gate can be set too aggressive or too weak. We adjust the opening and closing force, set the limits properly, and test the safety sensors so the gate reverses if something is in its path. That’s a detail that matters when you have kids and dogs in the yard.
Wrought Iron Gate Repair
Wrought Iron Gate Repair addresses the ornamental ironwork on residential driveways and garden gates, where bent bars, cracked scrolls, and sagging sections are the most common failures. Repairs in San Antonio usually run $180 to $850 depending on whether the work is straightening, welding, or a combination of both. We’ll show you a written price after we inspect the gate, before anything is disassembled.
Bent Picket and Rail Straightening
After a storm or a slow vehicle bump, wrought iron pickets can bend while the frame stays intact. We can often straighten these on site using controlled techniques that don’t damage the surrounding finish. Each picket is checked against the adjacent ones so the repair doesn’t stand out.
When the Design Needs to Stay Intact
Older wrought iron gates in San Antonio neighborhoods like Terrell Hills and Alamo Heights often have custom scrollwork that’s hard to replace. We preserve what’s salvageable and fabricate matching pieces where needed. The goal is a repair you can’t pick out from five feet away.
Metal Gate Repair
Metal Gate Repair is the broad category covering steel, aluminum, and chain-link gates as well as iron, and it’s what you need when the metal itself is bent, cracked, or broken. Metal gate repair in San Antonio ranges from $150 for a simple hinge replacement to $950 for a full frame rebuild on a double-wide driveway gate. The written quote you get before we start is the price you pay when we’re done.
Steel and Aluminum Frame Repairs
Steel frames usually fail at the corners, where the stress concentrates. Aluminum gates more often bow in the middle or crack around the hinge mounts. We cut out the failed section, weld or bolt in a replacement, and re-square the gate before rehanging it.
Chain-Link and Security Gates
Chain-link gates are routine work for us. We replace bent top rails, torn mesh, and broken tension bands, and we check the post footings to make sure the gate isn’t leaning because the post is rotting or shifting below grade. For automatic metal gates, we also test the opener’s force and limit settings before we leave. See our Gate Repair in San Antonio page for the full range of services we offer.
Wood Gate Repair
Wood Gate Repair addresses the sagging, sticking, rotting, and hardware failures that wood gates develop in San Antonio’s wet-dry climate. Repairs typically run $140 to $600 depending on the number of boards, the frame condition, and whether you need new hardware. Every wood gate repair includes a written price before work starts.
Sagging Frames and Failing Hardware
The most common wood gate problem we see is a frame that has pulled apart at the corners, usually because the gate was built with no diagonal brace or the brace is on the wrong side. We re-square the frame, add or reconfigure the brace, and replace hinges and latches that have bent under the weight. A properly braced wood gate should close with two fingers.
Board Replacement and Rot Repair
Cedar is the most common wood for San Antonio gates, and it holds up fairly well, but the bottom boards absorb moisture from rain splash. We replace rotten boards with matching material and re-seal the bottom edge so water doesn’t wick up into the new wood. We keep our work area clean with drop cloths and shoe covers, and we leave a photo of the cleanup before we go.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We’re factory-trained on the gate opener brands families in San Antonio actually have. Viking openers are common on residential driveway gates, and we know their solar and battery-backup models well enough to diagnose most issues on the first visit. Ghost Controls openers show up a lot on lighter gates and ranch entrances, and we carry their remote and receiver parts on the truck.
DoorKing and Elite are the workhorses of commercial properties, and we service both regularly from Lackland AFB to Leon Valley. Whether your system uses any of these brands or another make entirely, we can almost always help. If you’re considering an upgrade rather than a repair, our Gate Installation page covers replacing an old gate with a new one built to last, and our Electric Gate Repair page goes deeper on opener and control board issues.
Signs You Need a Pro Right Now
- The gate won’t stay closed or latched. A gate that swings open on its own is a security issue and a safety issue. The latch or the post alignment is usually the cause, and a full failure is probably close behind.
- The gate scrapes the ground or the frame when it moves. That scraping sound means the gate is out of level and the hinges or wheels are wearing unevenly. The longer it runs, the more expensive the fix gets.
- The opener makes noise but the gate doesn’t move. A stripped drive gear, a broken chain, or a failing capacitor all sound similar. Running the opener in this condition can burn out the motor.
- You see visible rust around hinges or weld points. Rust at a stress point is a crack waiting to happen. Early rust treatment is an inexpensive fix; a broken weld is not.
- The gate reverses for no reason or fails to stop. That means the safety sensors or the limit switches are out of adjustment. A gate that doesn’t reverse properly is dangerous around kids and pets.
Any of these signs means it’s time to call a professional. Latch & Post Gate Repair San Antonio answers the phone 24/7 at (325) 252-5195, and we’ll talk through what you’re seeing before we ever schedule a visit.
Our Process, Step by Step
- 1
You call and explain what’s happening. A live person answers, day or night. We listen to what the gate is doing, ask a few questions, and schedule a visit that works for you. We can often arrive the same day for urgent repairs.
- 2
We arrive on time and inspect the gate. Your technician introduces himself, puts on shoe covers before entering the house, and goes over the gate thoroughly. We check the hinges, posts, opener, sensors, and track, and we explain what we found in plain language.
- 3
We give you a written price before any work starts. The number on the page is the number you pay. No surprises, no pressure to add work you didn’t ask for. You decide what gets fixed.
- 4
We do the repair with the right parts and tools. We carry common components for Viking, Ghost Controls, DoorKing, and Elite openers, plus a full kit of welding and fabrication tools. We work carefully, and we respect the quiet hours if you have sleeping kids.
- 5
We clean up and show you the proof. Drop cloths picked up, debris removed, and a photo of the cleaned area before we leave. Then we walk you through what we did and what to watch for going forward. Every repair is covered by our 365-Day Done Right Promise.
How Much Does Gate Repair Cost in San Antonio?
A typical gate repair in San Antonio runs $150 to $650 for most residential jobs. Simple fixes like a hinge replacement or a latch adjustment fall at the low end, around $150 to $250. Bigger structural work, like welding a cracked frame or rebuilding a sagging wooden gate, runs $300 to $650. Sliding gate repairs with track realignment and motor service can reach $800 to $1,200. Commercial gate work has a wider range, from $350 for an access-control adjustment to $2,400 for a full structural repair on a heavy automated gate.
What affects the price: the gate’s weight and size, whether welding is required, the condition of the posts, and how many components need replacement. You can avoid overpaying by addressing problems early, before a worn wheel turns into a damaged track. Our free estimates include the full inspection and a written quote, and they’re always no-obligation. Call (325) 252-5195 and we’ll come out to look at the gate, explain what’s wrong, and tell you exactly what it costs to fix it.
Our Service Area Near San Antonio
Latch & Post Gate Repair San Antonio serves the whole metro area, including Alamo Heights, Windcrest, Castle Hills, Leon Valley, Timberwood Park, Terrell Hills, Kirby, Lackland AFB, and Live Oak. Most residential repairs within the city can be scheduled within a day or two, and emergency calls are answered around the clock. We also cover the surrounding communities, so if you found us from our Gate Repair in Boerne page, the same 365-Day Done Right Promise applies out there too.
Serving San Antonio, TX - Our Local Coverage Area
We’re based in the San Antonio area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in San Antonio
Gate repair is the process of diagnosing and fixing any component of a gate that isn’t working correctly: hinges, latches, posts, tracks, rollers, openers, sensors, or the frame itself. It covers both manual gates and automated ones. The goal is a gate that opens, closes, and latches the way it did when it was new.
Most repairs take between one and three hours on site. Simpler fixes like a latch or hinge replacement are often done in under an hour. Structural work that requires welding or frame rebuilding may take half a day or more, and we’ll tell you the timeline before we start.
Residential gate repairs in San Antonio typically run $150 to $650, while commercial work can range from $350 to $2,400. The exact price depends on the gate’s size, the parts needed, and whether welding is required. Every estimate is free and you’ll always get a written price before any work begins. Call (325) 252-5195 for an exact quote.
Yes. Our technicians are factory-trained on Viking, Ghost Controls, DoorKing, and Elite gate openers, and we carry many of their common parts on the truck. That usually means we can diagnose and repair on the first visit. We also service other brands, and we’ll tell you honestly if a part needs to be ordered.
A live person answers our phone 24 hours a day, seven days a week at (325) 252-5195. If your gate is stuck open, stuck closed, or poses a safety risk, we’ll get a technician out as quickly as possible. You’ll always know the price before we begin work, even on emergency calls.
Every repair and installation we perform is covered by the 365-Day Done Right Promise. If the repair isn’t right within a year of the service date, we come back and make it right at no charge. That’s the entire promise, and it applies to all work we do.
Clear a path to the gate so the technician can access both sides, and move any vehicles that block the gate’s full swing or slide. If you have pets that use the yard, bring them inside or let us know so we can work around them. We’ll put on shoe covers and lay drop cloths before we step inside your home for any indoor access work. Call (325) 252-5195 and we’ll walk you through what to expect.
Schedule Your Gate Repair Service in San Antonio Today
Call (325) 252-5195 for a free, no-obligation estimate from Latch & Post Gate Repair San Antonio. A live person answers 24/7, and we’ll schedule a visit at your convenience. You’ll get a written price before any work begins, and every repair is backed by our 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Antonio, serving San Antonio since 2009.